Compare/AGCO AGCOSTAR 8425 vs AGCO DT220A
Search

AGCO AGCOSTAR 8425 vs AGCO DT220A

Verdict: AGCO AGCOSTAR 8425 vs AGCO DT220A

The AGCO AGCOSTAR 8425 and the AGCO DT220A are both tractors — here is how they stack up on the figures that matter. AGCO AGCOSTAR 8425 leads on rated power with 425 hp against 229 hp. AGCO DT220A is the lighter machine (9,049 kg vs 12,836 kg), which helps on soft ground and transport, while the heavier model carries more ballast for traction-limited draft work. AGCO AGCOSTAR 8425 holds more fuel (870.6 L vs 599.9 L) for longer stints between fills. AGCO DT220A is the newer design (2005 vs 1995). In short: choose the AGCO AGCOSTAR 8425 for outright pulling power, or the AGCO DT220A if a tighter budget and lighter footprint matter more. Compare the full spec tables below before booking a demo.

Tune the fit score
Tell us about your operation
Fit & specs
AGCO AGCOSTAR 8425 Tractor
AGCO
62
Fit score
Clear
AGCO DT220A Tractor
AGCO
85
Fit score
Best match
Clear
Rated power
425 hp
229 hp
Confidence
40%
40%
Guide price
Overview
Manufacturer
AGCOReference
AGCOReference
Gear 2H used for pull test.Reference
Pull at 4.1 KPHReference
Final drives
outboard planetaryReference
Steering
hydrostatic powerReference
Engine
Fuel tank
870.6 LReference
599.9 LReference
Engine
316.9 kWReference
193.9 kWReference
Drawbar (tested)
258.5 kWReference
149.5 kWReference
Displacement
12.7 LReference
8.4 LReference
Bore/Stroke
140 x 152 mmReference
111 x 145 mmReference
Power
316.9 kWReference
193.9 kWReference
Fuel system
direct injectionReference
Air cleaner
dual paper elements with aspiratorReference
two paper elementsReference
Pre-heating
coolant heaterReference
thermostartReference
Compression
16.5:1Reference
Rated RPM
2100Reference
2200Reference
Torque
2034.0 NmReference
Torque RPM
1200Reference
Starter volts
12Reference
12Reference
Max power
258.5 kWReference
149.5 kWReference
Emissions
Tier IIReference
Power at rated engine speed
170.4 kWReference
Transmission
Transmission
Eaton FullerReference
PowerMaxx CVTReference
Gears
18 forward and 2 reverseReference
infinite forward and reverse (two-range)Reference
Clutch
393.7mm cerametallic discReference
PTO & Hydraulics
Type
partially synchronizedReference
continuously variable transmissionReference
Pressure
172.4 barReference
200.0 barReference
Valves
4 or 5Reference
4 or 5Reference
Pump flow
132.5 lpmReference
SCV flow
102.2 lpmReference
PTO (claimed)
164.1 kWReference
PTO (tested)
185.9 kWReference
Total flow
147.6 lpmReference
Rear Type
3Reference
Rear lift (at 24"/610mm)
6531 kgReference
Rear PTO
independentReference
Rear PTO Type
540/1000Reference
Power at rated PTO speed
184.9 kWReference
Dimensions
Wheelbase
348 cmReference
307 cmReference
Weight
12836 kgReference
9049 kgReference
Front tire
20.8R42Reference
Rear tire
20.8R42Reference
Ag front
20.8R38Reference
Ag rear
20.8R38Reference
Length
691 cmReference
523 cmReference
Width
388 cmReference
Ground clearance
52 cmReference
Clearance (drawbar)
58 cmReference
Shipping
12836 kgReference
Ballasted
18314 kgReference
Height
309 cmReference
Shipping weight
9049 kgReference
Front axle
HydraMaxx optionalReference
Electrical
Ground
negativeReference
negativeReference
Charging system
alternatorReference
Charging amps
130Reference
Batteries
3Reference
Battery CCA
700 (Cummins)Reference
Battery volts
12Reference
12Reference
Capacities
Max capacity
19278 kgReference
AGCO 8425 Height
Hood
240 cmReference
Cab
338 cmReference
Exhaust
352 cmReference
Test results
Fuel use
83.6 l/hourReference
54.9 l/hourReference
Max pull
16101 kgReference
12333 kgReference
Variants
8470
similar Massey Ferguson modelReference
DT220A Serial Numbers
2005
P001001Reference
2006
R001001Reference
2007
S001001Reference
Location:
Rear of tractorReference

Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.

Comparing 0
Compare (pick 2+)