Search
AGCO Allis 7630 vs AGCO Allis 8630
Verdict: AGCO Allis 7630 vs AGCO Allis 8630
The AGCO Allis 7630 and the AGCO Allis 8630 are both tractors — here is how they stack up on the figures that matter. AGCO Allis 8630 leads on rated power with 120 hp against 115 hp. AGCO Allis 8630 is the lighter machine (4,762 kg vs 5,170 kg), which helps on soft ground and transport, while the heavier model carries more ballast for traction-limited draft work. In short: choose the AGCO Allis 8630 for outright pulling power, or the AGCO Allis 7630 if a tighter budget and lighter footprint matter more. Compare the full spec tables below before booking a demo.
Tune the fit score
Tell us about your operation
Fit & specs
AGCO Allis
85
Fit score
Best match
Clear
AGCO Allis
85
Fit score
Best match
Clear
Rated power
115 hp
120 hp
Confidence
40%
40%
Guide price
—
—
Overview
Distributor
AGCO Allis (a part of AGCO)Reference
AGCO AllisReference
Manufacturer
SLHReference
SAMEReference
With 18.4R38 rear tires.Reference
Six synchronized gears in four ranges with synchronized reverser.Reference
Final drives
inboard planetaryReference
—
Differential lock
mechanical front and rearReference
—
Engine
Engine
91.1 kWReference
—
Displacement
6.2 LReference
6.0 LReference
Bore/Stroke
105 x 120 mmReference
105 x 116 mmReference
Power
91.1 kWReference
—
Air cleaner
dual dry elementReference
—
Compression
17:1Reference
—
Rated RPM
2260Reference
2500Reference
Idle RPM
650-2440Reference
—
Starter
electricReference
—
Starter volts
12Reference
12Reference
Starter power
3.5 kWReference
—
Oil capacity
97.4 LReference
—
Fuel tank
—
210.1 LReference
Drawbar (tested)
—
69.8 kWReference
Power at rated engine speed
—
89.2 kWReference
Max power
—
69.8 kWReference
Transmission
Gears
24 forward and 12 reverseReference
36 forward and reverseReference
PTO & Hydraulics
PTO (claimed)
85.8 kWReference
88.7 kWReference
Hydraulic system
87.4 LReference
—
Type
synchromeshReference
partial power shiftReference
Capacity
87.4 LReference
—
Pressure
180.0 barReference
—
Valves
2Reference
3Reference
Pump flow
64.0 lpmReference
104.8 lpmReference
Rear Type
III/IIReference
III/IIReference
Control
lower link draft controlReference
—
Rear lift (at ends)
5400 kgReference
—
Rear PTO
independentReference
independentReference
Clutch
hydraulic cerametallic 350mm discReference
—
Rear PTO Type
540/1000 (1.375)Reference
540/540E/1000/1000EReference
Engine RPM
1000@2286Reference
—
PTO (tested)
—
89.2 kWReference
Rear lift
—
4540 kgReference
Capacities
Fuel
210.1 LReference
—
Dimensions
Wheelbase
279 cmReference
279 cmReference
Weight
5170 kgReference
4762 kgReference
Front tire
14.9R30Reference
11.00-16Reference
Rear tire
18.4R38Reference
18.4R38Reference
Standard tires (ag)
Front: 14.9R30. Rear: 18.4R38Reference
—
Optional tires (ag)
Front: 16.9R30. Rear: 20.8R38Reference
—
Length
449 cmReference
—
Width
220 cmReference
—
Height (exhaust)
300 cmReference
—
Shipping weight
5170 kgReference
—
Max weight
8099 kgReference
—
Ground clearance
54 cmReference
—
Front tread
162 to 203 cmReference
—
Rear tread
162 to 224 cmReference
—
Ag front
—
11.00-16Reference
Ag rear
—
18.4R38Reference
7630 Serial Numbers
1991
1001Reference
1001Reference
1992
1066Reference
1157Reference
Location:
Serial number plate on the right side of the 7630 console.Reference
Console, right sideReference
Electrical
Ground
negativeReference
negativeReference
Charging system
alternatorReference
—
Charging amps
65Reference
—
Battery volts
12Reference
12Reference
Battery AH
143Reference
—
Speeds
Variants
Antares 130
—
similar SAME modelReference
8630 Serial Numbers
1993
—
1251Reference
1994
—
1444Reference
1995
—
1501Reference
1996
—
1509Reference
Test results
Fuel use
—
26.9 l/hourReference
Max pull
—
5066 kgReference
Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.