Search
AGCO Allis 9690 vs AGCO Allis 9815
Verdict: AGCO Allis 9690 vs AGCO Allis 9815
The AGCO Allis 9690 and the AGCO Allis 9815 are both tractors — here is how they stack up on the figures that matter. AGCO Allis 9815 leads on rated power with 216 hp against 196 hp. AGCO Allis 9690 holds more fuel (367.1 L vs 344.4 L) for longer stints between fills. In short: choose the AGCO Allis 9815 for outright pulling power, or the AGCO Allis 9690 if a tighter budget and lighter footprint matter more. Compare the full spec tables below before booking a demo.
Tune the fit score
Tell us about your operation
Fit & specs
AGCO Allis
85
Fit score
Best match
Clear
AGCO Allis
85
Fit score
Best match
Clear
Rated power
196 hp
216 hp
Confidence
40%
40%
Guide price
—
—
Overview
Manufacturer
AGCO Allis (a part of AGCO)Reference
AGCO AllisReference
Gear 7 used for power test.Reference
Gear 4 used for pull test.Reference
Final drives
inboard planetaryReference
inboard planetaryReference
Differential lock
electro-hydraulic rearReference
electro-hydraulic rearReference
Engine
Fuel tank
367.1 LReference
344.4 LReference
Drawbar (tested)
127.2 kWReference
138.8 kWReference
Displacement
9.6 LReference
8.7 LReference
Bore/Stroke
125 x 130 mmReference
117 x 136 mmReference
Pre-heating
ether injectionReference
ether injectionReference
Compression
15.8:1Reference
15.8:1Reference
Rated RPM
2300Reference
2200Reference
Starter volts
12Reference
12Reference
Oil capacity
22.7 LReference
—
Max power
127.2 kWReference
138.8 kWReference
Power at rated engine speed
145.9 kWReference
161.2 kWReference
Air cleaner
—
dual paper elementsReference
Transmission
Gears
18 forward and 9 reverseReference
18 forward and 9 reverseReference
PTO & Hydraulics
PTO (claimed)
145.4 kWReference
160.3 kWReference
PTO (tested)
153.2 kWReference
170.9 kWReference
Type
full power shiftReference
full power shiftReference
Pressure
172.4 barReference
189.6 barReference
Rear valves
3 or 4Reference
3 or 4Reference
Pump flow
90.8 lpmReference
98.4 lpmReference
Rear Type
III/IIReference
IIIReference
Control
lower-link draft sensingReference
lower-link draft sensingReference
Rear lift (at 24"/610mm)
4490 kgReference
6350 kgReference
Rear PTO
independentReference
independentReference
Clutch
hydraulic wet discReference
hydraulic wet discReference
Rear PTO Type
1000Reference
1000 (1.75)Reference
Power at rated PTO speed
153.2 kWReference
164.1 kWReference
Dimensions
Wheelbase
292 cmReference
292 cmReference
Weight
18100 to 19405 poundsReference
18100 to 19610 poundsReference
Front tire
16.9R28Reference
16.9R28Reference
Rear tire
20.8R38Reference
20.8R38Reference
Standard tires (ag)
Front: 16.9R28. Rear: 20.8R38Reference
Front: 16.9R28. Rear: 20.8R38Reference
Length
508 cmReference
—
Width
243 cmReference
—
Height (cab)
306 cmReference
—
Shipping weight
8210 kgReference
—
Operating weight
8802 kgReference
—
Clearance (front axle)
55 cmReference
—
Clearance (drawbar)
43 cmReference
—
Bar rear axle
98 by 2921 mmReference
98 by 2921 mmReference
Front tread
155 to 221 cmReference
155 to 221 cmReference
Rear tread
162 to 320 cmReference
162 to 320 cmReference
Shipping
—
8210 kgReference
Operating
—
8895 kgReference
Ballasted
—
11674 kgReference
9690 Serial Numbers
1994
981001Reference
901001Reference
1995
981501Reference
901501Reference
Location:
Console, right sideReference
Console, right sideReference
Electrical
Ground
negativeReference
negativeReference
Charging system
alternatorReference
alternatorReference
Charging amps
105Reference
—
Batteries
2Reference
2Reference
Battery CCA
580Reference
—
Battery volts
12Reference
12Reference
Test results
Fuel use
47.3 l/hourReference
51.9 l/hourReference
Max pull
—
11675 kgReference
9815 Serial Numbers
1996
—
902301Reference
1997
—
902357Reference
Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.