Compare/Allis Chalmers 10-18 vs Allis Chalmers WC
Search

Allis Chalmers 10-18 vs Allis Chalmers WC

Verdict: Allis Chalmers 10-18 vs Allis Chalmers WC

The Allis Chalmers 10-18 and the Allis Chalmers WC are both tractors — here is how they stack up on the figures that matter. Allis Chalmers WC leads on rated power with 12 hp against 10 hp. Allis Chalmers 10-18 is the lighter machine (2,109 kg vs 2,700 kg), which helps on soft ground and transport, while the heavier model carries more ballast for traction-limited draft work. Allis Chalmers 10-18 holds more fuel (66.2 L vs 56.8 L) for longer stints between fills. Allis Chalmers WC is the newer design (1933 vs 1914). In short: choose the Allis Chalmers WC for outright pulling power, or the Allis Chalmers 10-18 if a tighter budget and lighter footprint matter more. Compare the full spec tables below before booking a demo.

Tune the fit score
Tell us about your operation
Fit & specs
Allis Chalmers 10-18 Tractor
Allis Chalmers
62
Fit score
Best match
Clear
Allis Chalmers WC Tractor
Allis Chalmers
62
Fit score
Best match
Clear
Rated power
10 hp
12 hp
Confidence
40%
40%
Guide price
Overview
Manufacturer
Allis ChalmersReference
Allis ChalmersReference
liquid-cooledReference
Operated via gearshift lever and foot clutch. Fourth gear was not recommended for tractors equipped with steel wheels.Reference
Drive
3x2 2WDReference
Steering
manualReference
manualReference
Total built
178,202Reference
Engine
Fuel tank
66.2 LReference
56.8 LReference
Drawbar (claimed)
7.5 kWReference
8.9 kWReference
Belt (claimed)
13.4 kWReference
15.7 kWReference
Displacement
5.0 LReference
3.3 LReference
Bore/Stroke
133 x 178 mmReference
102 x 102 mmReference
Rated RPM
720Reference
1300Reference
Starter type
hand-crankReference
electricReference
Aux. fuel
3.8 LReference
Plows
2Reference
Drawbar (tested)
14.0 kWReference
Belt (tested)
19.0 kWReference
Fuel use
10.8 l/hourReference
Air cleaner
oil bathReference
Compression
5.0:1Reference
Firing order
1-2-4-3Reference
Coolant capacity
13.2 LReference
Sparkplug gap
0.762 mmReference
Point gap
0.508 mmReference
Intake valve clearance
0.254 mmReference
Exhaust valve clearance
0.254 mmReference
Oil capacity
4.7 LReference
Belt power (max)
19.0 kWReference
Max power
15.2 kWReference
Transmission
Type
gearReference
non-synchronized gearReference
Gears
1 forward and reverseReference
4 forward and 1 reverseReference
Oil type
[0oC]Reference
32oF [0oC]↑
: SAE140Reference
32oF [0oC]↓
: SAE90Reference
Dimensions
Weight
2109 kgReference
2700 to 3792 poundsReference
Rear tire
56x12Reference
40x6Reference
Ag rear
56x12 (steel)Reference
11.25x24Reference
Length
355 cmReference
345 cmReference
Height
190 cmReference
160 cmReference
Rear axle
74 mmReference
Front tire
24x4Reference
Ag front
5.25-17Reference
Ground clearance
73 cmReference
Rear tread
165 to 193 cmReference
Shipping
1496 kgReference
Operating
1720 kgReference
Ballasted
2061 kgReference
Capacities
Diameter
36 cmReference
22 cmReference
Width
195 cmReference
193 cmReference
RPM
1170Reference
Variants
WF
Standard front version (wide)Reference
PTO & Hydraulics
Rear PTO
transmissionReference
Rear PTO Type
535Reference
WC Serial Number Location
WC Serial Numbers
1933
1Reference
1934
29Reference
1935
3127Reference
1936
13870Reference
1937
31784Reference
1938
60790Reference
1939
75216Reference
1940
91534Reference
1941
103517Reference
1942
114534Reference
1943
123171Reference
1944
127642Reference
1945
134624Reference
1946
148091Reference
1947
152845Reference
1948
170174Reference
Final
178202Reference
Electrical
Charging system
generatorReference
Battery volts
6Reference
Battery AH
95Reference
Test results
Belt fuel use (max)
9.8 l/hourReference
Max pull
1385 kgReference

Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.

Comparing 0
Compare (pick 2+)