Compare/Allis Chalmers 210 vs Allis Chalmers HD11AG Series B
Search

Allis Chalmers 210 vs Allis Chalmers HD11AG Series B

Verdict: Allis Chalmers 210 vs Allis Chalmers HD11AG Series B

The Allis Chalmers 210 and the Allis Chalmers HD11AG Series B are both tractors — here is how they stack up on the figures that matter. Allis Chalmers HD11AG Series B leads on rated power with 127 hp against 122 hp. Allis Chalmers 210 is the lighter machine (5,635 kg vs 11,340 kg), which helps on soft ground and transport, while the heavier model carries more ballast for traction-limited draft work. Allis Chalmers HD11AG Series B holds more fuel (367.1 L vs 193.0 L) for longer stints between fills. Allis Chalmers HD11AG Series B is the newer design (1972 vs 1970). In short: choose the Allis Chalmers HD11AG Series B for outright pulling power, or the Allis Chalmers 210 if a tighter budget and lighter footprint matter more. Compare the full spec tables below before booking a demo.

Tune the fit score
Tell us about your operation
Fit & specs
Allis Chalmers 210 Tractor
Allis Chalmers
85
Fit score
Best match
Clear
Allis Chalmers HD11AG Series B Tractor
Allis Chalmers
85
Fit score
Best match
Clear
Rated power
122 hp
127 hp
Confidence
40%
40%
Guide price
Overview
Manufacturer
Allis ChalmersReference
Allis ChalmersReference
Four gears (1-4) plus reverse (R) in two ranges (low/high).Reference
liquid-cooledReference
Total built
1,471Reference
Original price
$11,642Reference
Drive
crawlerReference
Engine
Fuel tank
193.0 LReference
367.1 LReference
Drawbar (tested)
78.3 kWReference
Displacement
7.0 LReference
8.5 LReference
Bore/Stroke
108 x 127 mmReference
113 x 141 mmReference
Air cleaner
dryReference
dryReference
Compression
16:1Reference
Rated RPM
2200Reference
1800Reference
Idle RPM
650-2400Reference
Starter volts
12Reference
24Reference
Coolant capacity
19.9 LReference
41.6 LReference
Power at rated engine speed
91.3 kWReference
Max power
78.3 kWReference
Engine
94.3 kWReference
Drawbar (claimed)
79.2 kWReference
Power
94.3 kWReference
Starter
electricReference
Oil capacity
70.0 LReference
Transmission
Gears
8 forward and 2 reverseReference
6 forward and 3 reverseReference
PTO & Hydraulics
PTO (claimed)
91.0 kWReference
PTO (tested)
91.3 kWReference
Type
sliding gearReference
gearReference
Valves
2Reference
Pump flow
81.4 lpmReference
Rear Type
IIReference
Rear PTO
independentReference
Clutch
355.6mm dry discReference
Rear PTO Type
1000Reference
Dimensions
Wheelbase
254 cmReference
Weight
5635 kgReference
11340 kgReference
Front tire
11.00-16Reference
Rear tire
18.4-34Reference
Ag front
10.00-16Reference
Ag rear
20.8-38Reference
Length
416 cmReference
317 cmReference
Width
243 cmReference
243 cmReference
Operating weight
5635 kgReference
11340 kgReference
Ballasted weight
8185 kgReference
Clearance (front axle)
54 cmReference
Clearance (rear axle)
66 cmReference
Bar rear axle
92 mmReference
Steering wheel
213 cmReference
Height (hood)
213 cmReference
Ground clearance
30 cmReference
Gauge
187 cmReference
210 Serial Numbers
1970
1004Reference
1971
1107Reference
1972
2082Reference
Location:
Serial number stamped into the tractor's torque housing.Reference
Final
2469Reference
Electrical
Charging system
alternatorReference
alternatorReference
Batteries
2Reference
Battery volts
12Reference
Charging amps
20Reference
Allis Chalmers 210 Height
Hood
177 cmReference
Exhaust
271 cmReference
Test results
Fuel use
30.3 l/hourReference
Max pull
6360 kgReference
Allis Chalmers HD11AG Series B Tracks
Length on ground
233 cmReference
Area on ground
2.1 m²Reference
Ground pressure
0.5 barReference

Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.

Comparing 0
Compare (pick 2+)