Search
Allis Chalmers 5030 vs Allis Chalmers FD3
Verdict: Allis Chalmers 5030 vs Allis Chalmers FD3
The Allis Chalmers 5030 and the Allis Chalmers FD3 are both tractors — here is how they stack up on the figures that matter. Allis Chalmers 5030 leads on rated power with 26 hp against 25 hp. Allis Chalmers FD3 is the lighter machine (1,428 kg vs 2,100 kg), which helps on soft ground and transport, while the heavier model carries more ballast for traction-limited draft work. In short: choose the Allis Chalmers 5030 for outright pulling power, or the Allis Chalmers FD3 if a tighter budget and lighter footprint matter more. Compare the full spec tables below before booking a demo.
Tune the fit score
Tell us about your operation
Fit & specs
Allis Chalmers
62
Fit score
Best match
Clear
Allis Chalmers
62
Fit score
Best match
Clear
Rated power
26 hp
25 hp
Confidence
40%
40%
Guide price
—
—
Overview
Distributor
Allis ChalmersReference
—
Manufacturer
HinomotoReference
Allis ChalmersReference
Four gears, plus reverse, with high, low, and creeper ranges.Reference
liquid-cooledReference
Variants
9528
similar Simplicity modelReference
—
E280
similar Hinomoto modelReference
—
Engine
Engine
23.1 kWReference
18.6 kWReference
Drawbar (claimed)
16.7 kWReference
—
Plows
2Reference
—
Drawbar (tested)
16.8 kWReference
—
Displacement
1.5 LReference
1.6 LReference
Bore/Stroke
97 x 100 mmReference
79 x 89 mmReference
Power
23.1 kWReference
18.6 kWReference
Air cleaner
dryReference
—
Compression
23:1Reference
—
Rated RPM
2500Reference
2200Reference
Idle RPM
750-2750Reference
—
Firing order
1-2Reference
—
Starter
electricReference
—
Starter volts
12Reference
—
Coolant capacity
5.0 LReference
—
Oil capacity
20.8 LReference
7.0 LReference
Oil change
100 hReference
—
Power at rated engine speed
19.7 kWReference
—
Max power
16.8 kWReference
—
Fuel tank
—
45.0 LReference
Transmission
Gears
12 forward and 3 reverseReference
8 forward and 4 reverseReference
Clutch
215mm dry discReference
dry discReference
PTO & Hydraulics
PTO (claimed)
19.4 kWReference
—
PTO (tested)
19.7 kWReference
—
Hydraulic system
25.4 LReference
—
Type
unsynchronized gearReference
—
Capacity
25.4 LReference
—
Valves
0 or 1Reference
—
Pump flow
20.6 lpmReference
—
Rear Type
IReference
—
Rear PTO
liveReference
—
Rear PTO Type
540Reference
540/1000Reference
Engine RPM
540@2320Reference
—
Power at rated PTO speed
19.1 kWReference
—
Mid PTO Type
—
1000Reference
Capacities
Fuel
26.5 LReference
—
Dimensions
Wheelbase
156 cmReference
—
Weight
2100 to 2530 poundsReference
1428 kgReference
Front tire
5.00-15Reference
450x16Reference
Rear tire
12.4-24Reference
10x28Reference
Ag front
5.00-15Reference
450x16Reference
Ag rear
12.4-24Reference
10x28Reference
Lawn/turf front
20x8.00-10Reference
—
Lawn/turf rear
20x8.00-10Reference
—
Length
255 cmReference
284 cmReference
Width
135 cmReference
—
Clearance (front axle)
36 cmReference
—
Clearance (rear axle)
39 cmReference
—
Front tread
103 to 129 cmReference
113 to 153 cmReference
Rear tread
103 to 158 cmReference
128 to 167 cmReference
Shipping
952 kgReference
—
Operating
1147 kgReference
—
Ballasted
1758 kgReference
—
Steering wheel
136 cmReference
—
Height (steering wheel)
—
130 cmReference
Allis Chalmers 5030 attachments
5030 Serial Number Location
5030 Serial Numbers
1979
2005Reference
—
1980
2255Reference
—
1981
2976Reference
—
1982
3520Reference
—
1983
4066Reference
—
1984
4214Reference
—
1985
4359Reference
—
Electrical
Ground
negativeReference
—
Charging system
alternatorReference
—
Charging amps
12Reference
—
Battery volts
12Reference
—
Battery AH
70Reference
—
Attachment overview
Allis Chalmers 5030 Height
Hood
114 cmReference
—
ROPS
218 cmReference
—
Exhaust
208 cmReference
—
Test results
Fuel use
7.2 l/hourReference
—
Max pull
1537 kgReference
—
Speeds
FD3 Serial Number Location
Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.