Search
Allis Chalmers 5045 vs Allis Chalmers D15
Verdict: Allis Chalmers 5045 vs Allis Chalmers D15
The Allis Chalmers 5045 and the Allis Chalmers D15 are both tractors — here is how they stack up on the figures that matter. Allis Chalmers 5045 leads on rated power with 44 hp against 40 hp. Allis Chalmers 5045 is the lighter machine (1,746 kg vs 3,985 kg), which helps on soft ground and transport, while the heavier model carries more ballast for traction-limited draft work. Allis Chalmers 5045 is the newer design (1981 vs 1960). In short: choose the Allis Chalmers 5045 for outright pulling power, or the Allis Chalmers D15 if a tighter budget and lighter footprint matter more. Compare the full spec tables below before booking a demo.
Tune the fit score
Tell us about your operation
Fit & specs
Allis Chalmers
62
Fit score
Best match
Clear
Allis Chalmers
62
Fit score
Best match
Clear
Rated power
44 hp
40 hp
Confidence
40%
40%
Guide price
—
—
Overview
Distributor
Allis ChalmersReference
—
Manufacturer
FiatReference
Allis ChalmersReference
Four gears, plus reverse, in two ranges. Top two gears (3/4 and 7/8) are synchronized.Reference
The shuttle transmission is controlled using the gear shift lever and the shuttle control lever. The tractor must be stopped, and clutch used, to select one of four speeds with the gear shift. The shuttle control lever enables a shift between forward, reverse, or neutral without clutching. A PTO could be ordered on the industrial D15 with the shuttle, but it ran at 875 RPMs.Reference
Original price
$12,558Reference
—
Total built
—
957 (diesel)Reference
Steering
—
power optionalReference
Engine
Displacement
2.6 LReference
2.9 LReference
Starter volts
12Reference
12Reference
Coolant capacity
13.5 LReference
10.4 LReference
Drawbar (claimed)
—
26.3 kWReference
Plows
—
3Reference
Drawbar (tested)
—
26.3 kWReference
Bore/Stroke
—
90 x 111 mmReference
Fuel use
—
12.5 l/hourReference
Air cleaner
—
oil bathReference
Compression
—
15.35:1Reference
Rated RPM
—
2000Reference
Firing order
—
1-3-4-2Reference
Sparkplug gap
—
0.635 mmReference
Point gap
—
0.559 mmReference
Intake valve clearance
—
0.254 mmReference
Exhaust valve clearance
—
0.483 mmReference
Oil capacity
—
14.0 LReference
Power at rated engine speed
—
27.9 kWReference
Max power
—
24.8 kWReference
Transmission
Type
partially synchronizedReference
partial power shiftReference
Gears
8 forward and 2 reverseReference
4 forward and reverseReference
Clutch
mechanical dry discReference
—
Transmission
—
shuttleReference
Oil type
—
SAE80EPReference
PTO & Hydraulics
PTO (claimed)
32.8 kWReference
29.8 kWReference
Hydraulic system
23.6 LReference
9.5 LReference
Capacity
23.6 LReference
9.5 LReference
Valves
14Reference
—
Pump flow
3.8 lpmReference
—
Rear Type
II/IReference
II/IReference
Control
position control and top-link draft sensingReference
—
Rear lift
0 kgReference
—
Rear PTO
independentReference
liveReference
Rear PTO Type
540Reference
540Reference
PTO (tested)
—
29.8 kWReference
Pressure
—
158.6 barReference
Power at rated PTO speed
—
23.0 kWReference
Dimensions
Wheelbase
191 cmReference
223 cmReference
Weight
1746 kgReference
3985 to 4220 poundsReference
Front tire
6.00-16Reference
5.50-16Reference
Rear tire
13.6-28Reference
12.4-26Reference
Ag front
6.00-16Reference
7.50-16Reference
Ag rear
13.6-28Reference
14.9-26Reference
Length
—
331 cmReference
Height (hood)
—
145 cmReference
Height (exhaust)
—
203 cmReference
Clearance (front axle)
—
53 cmReference
Clearance (rear axle)
—
61 cmReference
Front tread
—
129 to 198 cmReference
Rear tread
—
137 to 223 cmReference
Operating
—
1914 kgReference
Ballasted
—
3436 kgReference
5045 Serial Numbers
1981
988501Reference
—
Location:
Serial number plate below the steering wheel.Reference
Torque housingReference
Electrical
Ground
negativeReference
positiveReference
Charging system
alternatorReference
—
Battery volts
12Reference
12Reference
Batteries
—
2 (diesel)Reference
Battery AH
—
70Reference
Capacities
Fuel
—
59.6 LReference
Diameter
—
22 cmReference
Width
—
170 cmReference
RPM
—
1678Reference
Speed
—
1205.79 meters/minReference
D15 Serial Numbers
1960
—
1001Reference
1961
—
1900Reference
1962
—
6470Reference
Final
—
8169Reference
Test results
Max pull
—
2571 kgReference
Speeds
Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.