Compare/Allis Chalmers 5045 vs Allis Chalmers D15 Series II
Search

Allis Chalmers 5045 vs Allis Chalmers D15 Series II

Verdict: Allis Chalmers 5045 vs Allis Chalmers D15 Series II

The Allis Chalmers 5045 and the Allis Chalmers D15 Series II are both tractors — here is how they stack up on the figures that matter. Allis Chalmers D15 Series II leads on rated power with 46 hp against 44 hp. Allis Chalmers 5045 is the lighter machine (1,746 kg vs 4,025 kg), which helps on soft ground and transport, while the heavier model carries more ballast for traction-limited draft work. Allis Chalmers 5045 is the newer design (1981 vs 1960). In short: choose the Allis Chalmers D15 Series II for outright pulling power, or the Allis Chalmers 5045 if a tighter budget and lighter footprint matter more. Compare the full spec tables below before booking a demo.

Tune the fit score
Tell us about your operation
Fit & specs
Allis Chalmers 5045 Tractor
Allis Chalmers
62
Fit score
Best match
Clear
Allis Chalmers D15 Series II Tractor
Allis Chalmers
62
Fit score
Best match
Clear
Rated power
44 hp
46 hp
Confidence
40%
40%
Guide price
Overview
Distributor
Allis ChalmersReference
Manufacturer
FiatReference
Allis ChalmersReference
Four gears, plus reverse, in two ranges. Top two gears (3/4 and 7/8) are synchronized.Reference
The shuttle transmission is controlled using the gear shift lever and the shuttle control lever. The tractor must be stopped, and clutch used, to select one of four speeds with the gear shift. The shuttle control lever enables a shift between forward, reverse, or neutral without clutching. A PTO could be ordered on the industrial D15 with the shuttle, but it ran at 875 RPMs.Reference
Original price
$12,558Reference
Total built
12,356Reference
Steering
power optionalReference
Engine
Displacement
2.6 LReference
2.9 LReference
Starter volts
12Reference
12Reference
Coolant capacity
13.5 LReference
11.4 LReference
Drawbar (tested)
28.6 kWReference
Bore/Stroke
90 x 111 mmReference
Fuel use
16.7 l/hourReference
Air cleaner
paper element with pre-cleanerReference
Compression
15.5:1Reference
Rated RPM
2000Reference
Firing order
1-3-4-2Reference
Sparkplug
Auto-Lite A-5Reference
Sparkplug gap
0.635 mmReference
Point gap
0.559 mmReference
Intake valve clearance
0.254 mmReference
Exhaust valve clearance
0.483 mmReference
Oil capacity
14.0 LReference
Power at rated engine speed
32.5 kWReference
Max power
26.9 kWReference
Transmission
Type
partially synchronizedReference
partial power shiftReference
Gears
8 forward and 2 reverseReference
4 forward and reverseReference
Clutch
mechanical dry discReference
Transmission
shuttleReference
Oil type
SAE80EPReference
PTO & Hydraulics
PTO (claimed)
32.8 kWReference
Hydraulic system
23.6 LReference
9.5 LReference
Capacity
23.6 LReference
9.5 LReference
Valves
14Reference
0 to 3Reference
Pump flow
3.8 lpmReference
Rear Type
II/IReference
II/IReference
Control
position control and top-link draft sensingReference
Rear lift
0 kgReference
Rear PTO
independentReference
Rear PTO Type
540Reference
PTO (tested)
34.4 kWReference
Pressure
158.6 barReference
Power at rated PTO speed
29.6 kWReference
Dimensions
Wheelbase
191 cmReference
Weight
1746 kgReference
4025 to 4525 poundsReference
Front tire
6.00-16Reference
5.50x16Reference
Rear tire
13.6-28Reference
12.4x26Reference
Ag front
6.00-16Reference
6.50x16Reference
Ag rear
13.6-28Reference
14.9x26Reference
Length
330 cmReference
Height (hood)
145 cmReference
Height (exhaust)
203 cmReference
Clearance (front axle)
53 cmReference
Clearance (rear axle)
62 cmReference
Front tread
129 to 198 cmReference
Rear tread
137 to 223 cmReference
Shipping
2052 kgReference
Operating
1855 kgReference
Ballasted
3676 kgReference
5045 Serial Numbers
1981
988501Reference
Location:
Serial number plate below the steering wheel.Reference
Electrical
Ground
negativeReference
positiveReference
Charging system
alternatorReference
Battery volts
12Reference
12Reference
Batteries
2 (diesel)Reference
Battery AH
70Reference
Capacities
Fuel
59.6 LReference
Diameter
22 cmReference
Width
170 cmReference
RPM
1678Reference
Speed
1205.79 meters/minReference
D15 Series II Serial Number Location
D15 Series II Serial Numbers
1963
13001Reference
1964
16928Reference
1965
19681Reference
1966
21375Reference
1967
23734Reference
1968
25127Reference
Final
25419Reference
Test results
Max pull
2924 kgReference
Speeds

Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.

Comparing 0
Compare (pick 2+)