Compare/Allis Chalmers 5045 vs Allis Chalmers WD45
Search

Allis Chalmers 5045 vs Allis Chalmers WD45

Verdict: Allis Chalmers 5045 vs Allis Chalmers WD45

The Allis Chalmers 5045 and the Allis Chalmers WD45 are both tractors — here is how they stack up on the figures that matter. Allis Chalmers 5045 leads on rated power with 44 hp against 40 hp. Allis Chalmers 5045 is the lighter machine (1,746 kg vs 3,995 kg), which helps on soft ground and transport, while the heavier model carries more ballast for traction-limited draft work. Allis Chalmers 5045 is the newer design (1981 vs 1953). In short: choose the Allis Chalmers 5045 for outright pulling power, or the Allis Chalmers WD45 if a tighter budget and lighter footprint matter more. Compare the full spec tables below before booking a demo.

Tune the fit score
Tell us about your operation
Fit & specs
Allis Chalmers 5045 Tractor
Allis Chalmers
62
Fit score
Best match
Clear
Allis Chalmers WD45 Tractor
Allis Chalmers
62
Fit score
Best match
Clear
Rated power
44 hp
40 hp
Confidence
40%
40%
Guide price
Overview
Distributor
Allis ChalmersReference
Manufacturer
FiatReference
Allis ChalmersReference
Four gears, plus reverse, in two ranges. Top two gears (3/4 and 7/8) are synchronized.Reference
with 12x28 rear tires.Reference
Original price
$12,558Reference
Total built
6,509 (diesel)Reference
Steering
powerReference
Engine
Displacement
2.6 LReference
3.8 LReference
Starter volts
12Reference
12Reference
Coolant capacity
13.5 LReference
16.1 LReference
Plows
4Reference
Drawbar (tested)
29.5 kWReference
Belt (tested)
32.9 kWReference
Bore/Stroke
87 x 105 mmReference
Compression
15.5:1Reference
Rated RPM
1625Reference
Torque
351.2 NmReference
Torque RPM
1169Reference
Firing order
1-5-3-6-2-4Reference
Sparkplug gap
0.762 mmReference
Point gap
0.508 mmReference
Intake valve clearance
0.254 mmReference
Exhaust valve clearance
0.483 mmReference
Air cleaner
oil bathReference
Oil capacity
16.1 LReference
Belt power (max)
32.3 kWReference
Max power
29.5 kWReference
Transmission
Type
partially synchronizedReference
sliding gearReference
Gears
8 forward and 2 reverseReference
4 forward and 1 reverseReference
Clutch
mechanical dry discReference
178mm wet discReference
PTO & Hydraulics
PTO (claimed)
32.8 kWReference
Hydraulic system
23.6 LReference
5.7 LReference
Capacity
23.6 LReference
5.7 LReference
Valves
14Reference
Pump flow
3.8 lpmReference
Rear Type
II/IReference
Control
position control and top-link draft sensingReference
Rear lift
0 kgReference
Rear PTO
independentReference
liveReference
Rear PTO Type
540Reference
540 (1.375)Reference
Oil type
SAE 80EPReference
45oF [7oC]↑
: SAE20WReference
45oF [7oC]↓
: SAE10WReference
Engine RPM
548@1400Reference
Dimensions
Wheelbase
191 cmReference
223 cmReference
Weight
1746 kgReference
3995 to 4285 poundsReference
Front tire
6.00-16Reference
5.50-16Reference
Rear tire
13.6-28Reference
12-28Reference
Ag front
6.00-16Reference
5.50-16Reference
Ag rear
13.6-28Reference
13-28Reference
Length
325 cmReference
Height (steering wheel)
172 cmReference
Height (exhaust)
207 cmReference
Gas Weight
1812 kgReference
Diesel Weight
1943 kgReference
Ground clearance
73 cmReference
Rear tread
141 to 228 cmReference
5045 Serial Numbers
1981
988501Reference
Location:
Serial number plate below the steering wheel.Reference
left brake housingReference
Electrical
Ground
negativeReference
positiveReference
Charging system
alternatorReference
Battery volts
12Reference
6Reference
Gas Batteries
1Reference
Diesel Batteries
2Reference
Battery AH
115Reference
Capacities
Fuel
56.8 LReference
Diameter
22 cmReference
Width
16 cmReference
RPM
1458Reference
WD45 Serial Numbers
1953
146607Reference
1954
160386Reference
1955
190993Reference
1956
217992Reference
1957
230295Reference
Test results
Belt fuel use (max)
11.7 l/hourReference
Max pull
2679 kgReference
Speeds

Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.

Comparing 0
Compare (pick 2+)