Compare/Allis Chalmers 6040 vs Allis Chalmers K
Search

Allis Chalmers 6040 vs Allis Chalmers K

Verdict: Allis Chalmers 6040 vs Allis Chalmers K

The Allis Chalmers 6040 and the Allis Chalmers K are both tractors — here is how they stack up on the figures that matter. Allis Chalmers 6040 leads on rated power with 40 hp against 36 hp. Allis Chalmers 6040 is the lighter machine (4,250 kg vs 5,216 kg), which helps on soft ground and transport, while the heavier model carries more ballast for traction-limited draft work. Allis Chalmers 6040 is the newer design (1974 vs 1929). In short: choose the Allis Chalmers 6040 for outright pulling power, or the Allis Chalmers K if a tighter budget and lighter footprint matter more. Compare the full spec tables below before booking a demo.

Tune the fit score
Tell us about your operation
Fit & specs
Allis Chalmers 6040 Tractor
Allis Chalmers
62
Fit score
Best match
Clear
Allis Chalmers K Tractor
Allis Chalmers
62
Fit score
Best match
Clear
Rated power
40 hp
36 hp
Confidence
40%
40%
Guide price
Overview
Distributor
Allis ChalmersReference
Manufacturer
RenaultReference
Allis ChalmersReference
With 13.6-28 rear tires.Reference
The four-speed transmission was introduced in 1935 at tractor serial number 4451.Reference
Total built
499Reference
9,468Reference
Original price
$6,934Reference
Differential lock
mechanical rearReference
Drive
crawlerReference
Engine
Drawbar (claimed)
27.4 kWReference
26.5 kWReference
Drawbar (tested)
27.4 kWReference
40.0 kWReference
Displacement
2.5 LReference
8.4 LReference
Bore/Stroke
91 x 127 mmReference
127 x 165 mmReference
Air cleaner
paper elementReference
oil bathReference
Compression
18.5:1Reference
5.2:1Reference
Rated RPM
2250Reference
1050Reference
Idle RPM
725-2475Reference
Starter
electricReference
Starter volts
12Reference
Coolant capacity
7.6 LReference
41.6 LReference
Oil capacity
27.4 LReference
20.8 LReference
Oil change
75 hReference
Power at rated engine speed
30.1 kWReference
Max power
27.4 kWReference
40.0 kWReference
Fuel tank
147.6 LReference
Belt (claimed)
36.8 kWReference
Belt (tested)
46.4 kWReference
Belt power (max)
46.4 kWReference
Transmission
Gears
10 forward and 2 reverseReference
4 forward and 1 reverseReference
PTO & Hydraulics
PTO (claimed)
30.1 kWReference
PTO (tested)
30.1 kWReference
Hydraulic system
27.4 LReference
Type
partial synchronizedReference
gearReference
Capacity
27.4 LReference
Pressure
158.6 barReference
Pump flow
25.4 lpmReference
Total flow
50.0 lpmReference
Steering flow
28.4 lpmReference
Steering press.
75.8 barReference
Rear Type
IIReference
Control
lower-link draft sensingReference
Rear PTO
liveReference
Clutch
254mm dry discReference
Rear PTO Type
540 (1.375)Reference
Engine RPM
540@2160Reference
Power at rated PTO speed
29.7 kWReference
Capacities
Fuel
45.4 LReference
Dimensions
Wheelbase
200 cmReference
Weight
4250 to 4680 poundsReference
5216 kgReference
Front tire
6.00-16Reference
Rear tire
14.9-28Reference
Ag front
6.00-16Reference
Ag rear
14.9-28Reference
Length
325 cmReference
314 cmReference
Width
165 cmReference
38 cmReference
Clearance (front axle)
40 cmReference
Clearance (rear axle)
53 cmReference
Front tread
121 to 190 cmReference
Rear tread
127 to 198 cmReference
Shipping
1927 kgReference
Operating
2122 kgReference
Ballasted
2753 kgReference
Steering wheel
157 cmReference
K Width
167 cmReference
Height (hood)
162 cmReference
K Gauge
121 cmReference
WK Gauge
160 cmReference
6040 Serial Numbers
Location:
Serial number plate on the right-front of the fuel tank, under the hood.Reference
Serial number on the transmission case or instrument panelReference
Electrical
Ground
negativeReference
Charging system
alternatorReference
Battery volts
12Reference
Allis Chalmers 6040 Height
Hood
136 cmReference
Exhaust
213 cmReference
Test results
Fuel use
10.6 l/hourReference
Max pull
2072 kgReference
5345 kgReference
Belt fuel use (max)
23.5 l/hourReference
Speeds
Variants
K
gasolineReference
WK
wide gasReference
KO
dieselReference
WKO
wide dieselReference
K Serial Numbers
1929
1Reference
1930
49Reference
1931
1373Reference
1932
2334Reference
1933
2654Reference
1934
3046Reference
1935
3594Reference
1936
4793Reference
Allis Chalmers K Tracks
Length on ground
170 cmReference
Area on ground
1.3 m²Reference
Ground pressure
0.4 barReference

Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.

Comparing 0
Compare (pick 2+)