Compare/Allis Chalmers 615 vs Allis Chalmers M7
Search

Allis Chalmers 615 vs Allis Chalmers M7

Verdict: Allis Chalmers 615 vs Allis Chalmers M7

The Allis Chalmers 615 and the Allis Chalmers M7 are both industrial tractors — here is how they stack up on the figures that matter. Allis Chalmers M7 leads on rated power with 63 hp against 57 hp. Allis Chalmers M7 is the lighter machine (2,620 kg vs 4,400 kg), which helps on soft ground and transport, while the heavier model carries more ballast for traction-limited draft work. Allis Chalmers 615 holds more fuel (60.6 L vs 39.7 L) for longer stints between fills. Allis Chalmers 615 is the newer design (1966 vs 1944). In short: choose the Allis Chalmers M7 for outright pulling power, or the Allis Chalmers 615 if a tighter budget and lighter footprint matter more. Compare the full spec tables below before booking a demo.

Tune the fit score
Tell us about your operation
Fit & specs
Allis Chalmers 615 Industrial Tractor
Allis Chalmers
62
Fit score
Best match
Clear
Allis Chalmers M7 Industrial Tractor
Allis Chalmers
62
Fit score
Best match
Clear
Rated power
57 hp
63 hp
Confidence
40%
40%
Guide price
Overview
Manufacturer
Allis ChalmersReference
Allis ChalmersReference
With 14.9x24 R4 rear tires.Reference
Three gears, plus reverse, with two-speed range shift.Reference
Final drives
bull gearReference
Total built
291Reference
Drive
half-trackReference
Variants
615
industrialReference
615TLB
backhoe-loaderReference
Engine
Fuel tank
60.6 LReference
39.7 LReference
Engine
42.5 kWReference
47.0 kWReference
Displacement
3.3 LReference
2.2 LReference
Bore/Stroke
98 x 105 mmReference
79 x 111 mmReference
Power
42.5 kWReference
47.0 kWReference
Compression
16.25:1Reference
6.48:1Reference
Rated RPM
2000Reference
4000Reference
Torque
207.5 NmReference
142.4 NmReference
Torque RPM
1750Reference
2000Reference
Starter volts
12Reference
6Reference
Oil capacity
8.5 LReference
4.7 LReference
Coolant capacity
12.8 LReference
11.4 LReference
Sparkplug
Auto-Lite A-5Reference
Sparkplug gap
0.584 mmReference
Point gap
0.559 mmReference
Intake valve clearance
0.381 mmReference
Exhaust valve clearance
0.381 mmReference
Idle RPM
650-2200Reference
Firing order
1-2-3-4Reference
Fuel system
carburetorReference
Pre-heating
gasoline-fired boilerReference
Starter
electricReference
Transmission
Gears
4 forward and 1 reverseReference
6 forward and 2 reverseReference
Clutch
dry discReference
203.2mm mechanical dry discReference
Transmission
WarnerReference
PTO & Hydraulics
Type
gearReference
gearReference
Pressure
155.1 barReference
Pump flow
90.8 lpmReference
Steering flow
19.9 lpmReference
Rear Type
IReference
Rear PTO Type
1000Reference
Dimensions
Wheelbase
220 cmReference
205 cmReference
Weight
4400 to 4550 poundsReference
2620 to 3120 poundsReference
Ag front
7.50x16Reference
Ag rear
16.9x24Reference
Length
320 cmReference
332 cmReference
Gas Weight
1995 kgReference
Diesel Weight
2063 kgReference
Front tread
129/138 cmReference
101 cmReference
Rear tread
157/183 cmReference
114 cmReference
Steering wheel
160 cmReference
Front tire
4.00-15Reference
Rear tire
70x12Reference
Industrial front
4.00-15Reference
Industrial rear
70x12 skisReference
Width
160 cmReference
Height
162 cmReference
Clearance (front axle)
34 cmReference
Clearance (drawbar)
40 cmReference
Shipping
1188 kgReference
Operating
1415 kgReference
Allis Chalmers 615 attachments
615 Serial Numbers
Location:
Serial number engraved into the left side of the tractor, on the flange where the clutch and engine meet.Reference
Serial number plate on the right side of the driver's compartment.Reference
Electrical
Gas Ground
positiveReference
Diesel Ground
negativeReference
Charging system
generatorReference
generatorReference
Battery volts
12Reference
6Reference
Ground
negativeReference
Charging amps
40Reference
Battery AH
116Reference
Allis Chalmers 615 Height
Hood
144 cmReference
Exhaust
200 cmReference
Speeds
M7 Serial Numbers
Capacities
Tow capacity
1360 kgReference

Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.

Comparing 0
Compare (pick 2+)