Search
Allis Chalmers 7000 vs Allis Chalmers 7010
Verdict: Allis Chalmers 7000 vs Allis Chalmers 7010
The Allis Chalmers 7000 and the Allis Chalmers 7010 are both tractors — here is how they stack up on the figures that matter. Allis Chalmers 7010 leads on rated power with 107 hp against 106 hp. Allis Chalmers 7010 is the lighter machine (5,107 kg vs 9,350 kg), which helps on soft ground and transport, while the heavier model carries more ballast for traction-limited draft work. Allis Chalmers 7010 is the newer design (1980 vs 1975). In short: choose the Allis Chalmers 7010 for outright pulling power, or the Allis Chalmers 7000 if a tighter budget and lighter footprint matter more. Compare the full spec tables below before booking a demo.
Tune the fit score
Tell us about your operation
Fit & specs
Allis Chalmers
85
Fit score
Best match
Clear
Allis Chalmers
85
Fit score
Best match
Clear
Rated power
106 hp
107 hp
Confidence
40%
40%
Guide price
—
—
Overview
Manufacturer
Allis ChalmersReference
Allis ChalmersReference
Four forward gears and one reverse combined with three-range power shift between low, direct, and overdrve. The black-chassis Allis 7000 used a new hydraulic wet clutch and torque limiter. A combination clutch/inching pedal put the transmission into low range when depressed.Reference
With 15.5x38 rear tires.Reference
Total built
7,264Reference
2,436Reference
Original price
$24,860Reference
$35,311Reference
Final drives
—
inboard planetaryReference
Differential lock
—
powerReference
Steering
—
hydrostatic powerReference
Engine
Drawbar (claimed)
66.4 kWReference
—
Drawbar (tested)
66.7 kWReference
66.4 kWReference
Displacement
4.9 LReference
4.9 LReference
Bore/Stroke
98 x 108 mmReference
98 x 108 mmReference
Air cleaner
dryReference
dual paper elementsReference
Compression
16.25:1Reference
16.25:1Reference
Rated RPM
2200Reference
2300Reference
Idle RPM
775-2465Reference
—
Firing order
1-5-3-6-2-4Reference
1-5-3-6-2-4Reference
Starter volts
12Reference
12Reference
Coolant capacity
21.3 LReference
24.6 LReference
Coolant change
2000 hReference
—
Intake valve clearance
0.381 mmReference
—
Exhaust valve clearance
0.381 mmReference
—
Oil capacity
24.6 LReference
28.0 LReference
Oil change
100 hReference
—
Power at rated engine speed
79.4 kWReference
79.6 kWReference
Max power
66.7 kWReference
66.4 kWReference
Transmission
Transmission
Power DirectorReference
Allis-Chalmers Power ShiftReference
Gears
12 forward and 3 reverseReference
12 forward and 2 reverseReference
Clutch
7-inch wet discs (power shift)Reference
—
PTO & Hydraulics
PTO (claimed)
79.0 kWReference
—
PTO (tested)
79.4 kWReference
79.6 kWReference
Hydraulic system
26.5 LReference
—
Type
partial power shiftReference
partial power shiftReference
Capacity
26.5 LReference
—
Valves
1Reference
2Reference
Pump flow
79.5 lpmReference
51.1 lpmReference
Total flow
94.6 lpmReference
170.3 lpmReference
Rear Type
IIReference
III/IIReference
Rear PTO
independentReference
independentReference
Rear PTO Type
540/1000Reference
540 1000Reference
Engine RPM
1000@2200Reference
—
Power at rated PTO speed
78.9 kWReference
79.3 kWReference
Steering flow
—
36.0 lpmReference
Rear lift (at 24"/610mm)
—
3030 kgReference
Capacities
Fuel
140.0 LReference
49.2 LReference
Rear diff.
30.3 LReference
63.2 LReference
Dimensions
Wheelbase
269 cmReference
269 cmReference
Weight
9350 to 9550 poundsReference
5107 kgReference
Front tire
10.00-16Reference
10.00-16Reference
Rear tire
18.4x38Reference
18.4-38Reference
Ag front
11L-15Reference
18.4x16Reference
Ag rear
23.1-26Reference
18.4-42Reference
Length
464 cmReference
—
Clearance (front axle)
60 cmReference
53 cmReference
Clearance (rear axle)
73 cmReference
71 cmReference
Rear axle
82 by 2946 mmReference
95 mmReference
Front tread
157 to 218 cmReference
152 to 223 cmReference
Rear tread
162 to 284 cmReference
162 to 226 cmReference
Shipping
4241 kgReference
—
Operating
4331 kgReference
—
Ballasted
5706 kgReference
—
Steering wheel
223 cmReference
220 cmReference
Width
—
301 cmReference
Operating weight
—
5107 kgReference
Ballasted weight
—
5801 kgReference
Allis Chalmers 7000 attachments
7000 Serial Numbers
1975
1001Reference
—
1976
1648Reference
—
1977
5036Reference
—
1978
6373Reference
—
1979
8963Reference
1001Reference
Location:
Serial number stamped on the right rear of the Allis 7000 differential housing, near the right lift cylinder.Reference
Above PTO shieldReference
Final
9503Reference
3433Reference
Electrical
Ground
negativeReference
—
Batteries
2Reference
—
Battery volts
12Reference
12Reference
Battery AH
95Reference
—
Charging system
—
alternatorReference
Allis Chalmers 7000 Height
Hood
175 cmReference
172 cmReference
Exhaust
287 cmReference
294 cmReference
Test results
Fuel use
25.4 l/hourReference
27.3 l/hourReference
Max pull
4493 kgReference
4316 kgReference
Allis Chalmers 7010 attachments
7010 Serial Numbers
1980
—
1925Reference
1981
—
2806Reference
Allis Chalmers 7010 Height
Speeds
Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.