Search
Allis Chalmers 7010 vs Allis Chalmers 8010 High-Clearance
Verdict: Allis Chalmers 7010 vs Allis Chalmers 8010 High-Clearance
The Allis Chalmers 7010 and the Allis Chalmers 8010 High-Clearance are both tractors — here is how they stack up on the figures that matter. Both are rated at the same 107 hp. Allis Chalmers 8010 High-Clearance is the newer design (1982 vs 1980). Use the full side-by-side spec tables below to weigh the details against your own operation, and confirm with a dealer demo.
Tune the fit score
Tell us about your operation
Fit & specs
Allis Chalmers
85
Fit score
Best match
Clear
Allis Chalmers
85
Fit score
Best match
Clear
Rated power
107 hp
107 hp
Confidence
40%
40%
Guide price
—
—
Overview
Manufacturer
Allis ChalmersReference
Allis ChalmersReference
With 15.5x38 rear tires.Reference
Six power shift gears in two ranges. Clutch must be used to shift range.Reference
Total built
2,436Reference
—
Original price
$35,311Reference
—
Final drives
inboard planetaryReference
—
Differential lock
powerReference
—
Steering
hydrostatic powerReference
—
Engine
Drawbar (tested)
66.4 kWReference
—
Displacement
4.9 LReference
4.9 LReference
Bore/Stroke
98 x 108 mmReference
98 x 108 mmReference
Air cleaner
dual paper elementsReference
—
Compression
16.25:1Reference
—
Rated RPM
2300Reference
2300Reference
Firing order
1-5-3-6-2-4Reference
—
Starter volts
12Reference
12Reference
Oil capacity
28.0 LReference
30.3 LReference
Coolant capacity
24.6 LReference
29.3 LReference
Power at rated engine speed
79.6 kWReference
—
Max power
66.4 kWReference
—
Drawbar (claimed)
—
69.4 kWReference
Operating RPM
—
750-2580Reference
Starter
—
electricReference
Transmission
Transmission
Allis-Chalmers Power ShiftReference
Power ShiftReference
Gears
12 forward and 2 reverseReference
12 forward and 2 reverseReference
PTO & Hydraulics
PTO (tested)
79.6 kWReference
—
Type
partial power shiftReference
six-speed power shiftReference
Valves
2Reference
—
Pump flow
51.1 lpmReference
—
Total flow
170.3 lpmReference
—
Steering flow
36.0 lpmReference
—
Rear Type
III/IIReference
III/IIReference
Rear lift (at 24"/610mm)
3030 kgReference
—
Rear PTO
independentReference
independentReference
Rear PTO Type
540 1000Reference
540/1000Reference
Power at rated PTO speed
79.3 kWReference
—
PTO (claimed)
—
80.1 kWReference
Hydraulic system
—
140.0 LReference
Capacity
—
140.0 LReference
Capacities
Fuel
49.2 LReference
227.1 LReference
Rear diff.
63.2 LReference
—
Dimensions
Wheelbase
269 cmReference
269 cmReference
Weight
5107 kgReference
—
Front tire
10.00-16Reference
9.50x20Reference
Rear tire
18.4-38Reference
18.4x38Reference
Ag front
18.4x16Reference
9.50x20Reference
Ag rear
18.4-42Reference
20.8x38Reference
Width
301 cmReference
229 cmReference
Operating weight
5107 kgReference
—
Ballasted weight
5801 kgReference
—
Clearance (front axle)
53 cmReference
92 cmReference
Clearance (rear axle)
71 cmReference
—
Rear axle
95 mmReference
—
Front tread
152 to 223 cmReference
177 to 198 cmReference
Rear tread
162 to 226 cmReference
177 to 218 cmReference
Steering wheel
220 cmReference
—
Length
—
474 cmReference
Height (cab)
—
327 cmReference
Height (exhaust)
—
325 cmReference
Clearance (drawbar)
—
77 cmReference
Allis Chalmers 7010 attachments
7010 Serial Numbers
1979
1001Reference
—
1980
1925Reference
—
1981
2806Reference
—
Location:
Above PTO shieldReference
—
Final
3433Reference
—
Electrical
Charging system
alternatorReference
—
Battery volts
12Reference
—
Allis Chalmers 7010 Height
Hood
172 cmReference
—
Exhaust
294 cmReference
—
Test results
Fuel use
27.3 l/hourReference
—
Max pull
4316 kgReference
—
Speeds
Variants
8010
—
row-cropReference
8010HC
—
high-cropReference
Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.