Search
Allis Chalmers 7050 vs Allis Chalmers 7060
Verdict: Allis Chalmers 7050 vs Allis Chalmers 7060
The Allis Chalmers 7050 and the Allis Chalmers 7060 are both tractors — here is how they stack up on the figures that matter. Allis Chalmers 7060 leads on rated power with 162 hp against 156 hp. Allis Chalmers 7050 is the lighter machine (6,588 kg vs 11,530 kg), which helps on soft ground and transport, while the heavier model carries more ballast for traction-limited draft work. Allis Chalmers 7060 is the newer design (1974 vs 1973). In short: choose the Allis Chalmers 7060 for outright pulling power, or the Allis Chalmers 7050 if a tighter budget and lighter footprint matter more. Compare the full spec tables below before booking a demo.
Tune the fit score
Tell us about your operation
Fit & specs
Allis Chalmers
85
Fit score
Best match
Clear
Allis Chalmers
85
Fit score
Best match
Clear
Rated power
156 hp
162 hp
Confidence
40%
40%
Guide price
—
—
Overview
Manufacturer
Allis ChalmersReference
Allis ChalmersReference
With 18.4x38 rear tires.Reference
The power shift transmission uses a gear shift and range shift. The range shift lever selects one of two ranges. The tractor must be stopped, and the clutch used, to change the range. The gear shift selects one of six forward gears, and reverse. The gears can be shifted while the tractor is in motion, simply by moving the lever. The clutch is needed to switch from a forward gear to reverse.Reference
Total built
2,302Reference
7,796Reference
Original price
$19,550Reference
$48,696Reference
Final drives
planetaryReference
inboard planetaryReference
Differential lock
hydraulic rearReference
—
Steering
—
hydrostatic powerReference
Engine
Drawbar (tested)
98.1 kWReference
105.6 kWReference
Displacement
7.0 LReference
7.0 LReference
Bore/Stroke
108 x 127 mmReference
108 x 127 mmReference
Air cleaner
dryReference
dry with pre-cleanerReference
Compression
16:1Reference
16:1Reference
Rated RPM
2300Reference
2300Reference
Power at rated engine speed
116.7 kWReference
120.4 kWReference
Max power
98.1 kWReference
105.6 kWReference
Fuel tank
—
49.2 LReference
Engine
—
143.2 kWReference
Power
—
143.2 kWReference
Firing order
—
1-5-3-6-2-4Reference
Starter volts
—
12Reference
Coolant capacity
—
30.3 LReference
Intake valve clearance
—
0.381 mmReference
Exhaust valve clearance
—
0.381 mmReference
Oil capacity
—
26.5 LReference
Transmission
Transmission
Allis-Chalmers Power Director XXReference
Allis-Chalmers Power ShiftReference
Gears
20 forward and 4 reverseReference
12 forward and 2 reverseReference
Oil type
—
Allis-Chalmers Power Fluid 821Reference
PTO & Hydraulics
PTO (tested)
116.7 kWReference
120.4 kWReference
Type
partial power shiftReference
partial power shiftReference
Pump flow
51.1 lpmReference
83.3 lpmReference
SCV flow
64.3 lpmReference
—
Total flow
170.3 lpmReference
170.3 lpmReference
Steering flow
36.0 lpmReference
36.0 lpmReference
Rear Type
III/IIReference
3/2Reference
Rear PTO
independentReference
independentReference
Rear PTO Type
540/1000Reference
540/1000 (optional)Reference
Engine RPM
1000@2300Reference
—
Power at rated PTO speed
116.8 kWReference
120.5 kWReference
PTO (claimed)
—
120.1 kWReference
Valves
—
2 or 3Reference
Rear lift (at 24"/610mm)
—
3030 kgReference
Dimensions
Weight
6588 kgReference
11530 to 14645 poundsReference
Front tire
11.00-16Reference
11.00x16Reference
Rear tire
20.8-38Reference
18.4x38Reference
Ag front
11.00-16Reference
14Lx16Reference
Ag rear
20.8-38Reference
18.4x42Reference
Length
414 cmReference
414 cmReference
Width
242 cmReference
303 cmReference
Height
294 cmReference
—
Operating weight
6588 kgReference
—
Ballasted weight
8858 kgReference
—
Bar rear axle
91 mmReference
—
Wheelbase
—
269 cmReference
Ground clearance
—
71 cmReference
Rear axle
—
101 mmReference
Shipping
—
5230 kgReference
Operating
—
6642 kgReference
Ballasted
—
9326 kgReference
Steering wheel
—
220 cmReference
Allis Chalmers 7050 attachments
7050 Serial Numbers
1973
1001Reference
—
1974
1688Reference
1001Reference
Location:
Above PTO shieldReference
Above PTO shieldReference
Final
3300Reference
9142Reference
Test results
Fuel use
37.1 l/hourReference
39.0 l/hourReference
Max pull
7351 kgReference
8097 kgReference
Speeds
Allis Chalmers 7060 attachments
7060 Serial Numbers
1975
—
1299Reference
1976
—
2749Reference
1977
—
4582Reference
1978
—
6001Reference
1979
—
6789Reference
1980
—
7693Reference
1981
—
8442Reference
Electrical
Ground
—
negativeReference
Batteries
—
4 (optional)Reference
Battery volts
—
12Reference
Allis Chalmers 7060 Height
Hood
—
175 cmReference
Exhaust
—
297 cmReference
Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.