Search
Allis Chalmers 710C vs Allis Chalmers D-10
Verdict: Allis Chalmers 710C vs Allis Chalmers D-10
The Allis Chalmers 710C and the Allis Chalmers D-10 are both industrial tractors — here is how they stack up on the figures that matter. Allis Chalmers D-10 leads on rated power with 39 hp against 25 hp. Allis Chalmers 710C is the newer design (1982 vs 1959). In short: choose the Allis Chalmers D-10 for outright pulling power, or the Allis Chalmers 710C if a tighter budget and lighter footprint matter more. Compare the full spec tables below before booking a demo.
Tune the fit score
Tell us about your operation
Fit & specs
Allis Chalmers
62
Fit score
Best match
Clear
Allis Chalmers
62
Fit score
Best match
Clear
Rated power
25 hp
39 hp
Confidence
40%
40%
Guide price
—
—
Overview
Manufacturer
Allis ChalmersReference
Allis ChalmersReference
liquid-cooled inlineReference
liquid-cooledReference
Final drives
inboard planetaryReference
—
Engine
Engine
48.5 kWReference
—
Displacement
3.3 LReference
2.4 LReference
Bore/Stroke
98 x 108 mmReference
89 x 98 mmReference
Power
48.5 kWReference
—
Fuel system
direct injectionReference
—
Compression
14.1:1Reference
7.5:1Reference
Rated RPM
2300Reference
1650Reference
Idle RPM
775-2580Reference
—
Firing order
1-3-4-2Reference
—
Starter
electricReference
electricReference
Starter volts
12Reference
12Reference
Coolant capacity
15.1 LReference
7.6 LReference
Oil capacity
11.4 LReference
6.2 LReference
Oil change
100 hReference
—
Fuel tank
—
47.3 LReference
Engine (net)
—
29.1 kWReference
Drawbar (claimed)
—
22.8 kWReference
Power (net)
—
29.1 kWReference
Torque
—
185.8 NmReference
Transmission
Transmission
WarnerReference
—
Gears
4 forward and reverseReference
4 forward and 1 reverseReference
PTO & Hydraulics
PTO (claimed)
18.6 kWReference
26.3 kWReference
Hydraulic system
102.2 LReference
—
Type
torque converterReference
gearReference
Capacity
102.2 LReference
—
Rear valves
2Reference
—
Pump flow
41.6 lpmReference
13.5 lpmReference
Total flow
109.8 lpmReference
—
Steering flow
18.9 lpmReference
—
Steering press.
103.4 barReference
—
Rear Type
IIReference
—
Rear PTO
independentReference
—
Clutch
hydraulicReference
229mm dry discReference
Rear PTO Type
540 (1.375)Reference
540Reference
Engine RPM
540@2100Reference
540@1650Reference
Pressure
—
103.4 barReference
Capacities
Fuel
75.7 LReference
—
Dimensions
Wheelbase
213 cmReference
200 cmReference
Front tire
11L-16Reference
—
Rear tire
16.9-24Reference
—
Industrial front
11L-16Reference
—
Industrial rear
16.9-24Reference
—
Width
210 cmReference
—
Height (ROPS)
251 cmReference
—
Ground clearance
33 cmReference
—
Front tread
170 cmReference
101 to 162 cmReference
Rear tread
165 cmReference
106 to 182 cmReference
Weight
—
1419 kgReference
Length
—
308 cmReference
Height (hood)
—
132 cmReference
Shipping weight
—
1419 kgReference
Clearance (front axle)
—
53 cmReference
Clearance (rear axle)
—
55 cmReference
Allis Chalmers 710C attachments
710C Serial Numbers
Location:
Serial number plate on the left side of the 710C, just behind the engine.Reference
—
Electrical
Ground
negativeReference
—
Charging system
alternatorReference
generatorReference
Charging amps
61Reference
—
Batteries
2Reference
—
Battery CCA
95Reference
—
Battery volts
12Reference
—
Battery Group
30HReference
—
Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.