Search
Allis Chalmers 710C vs Allis Chalmers I400
Verdict: Allis Chalmers 710C vs Allis Chalmers I400
The Allis Chalmers 710C and the Allis Chalmers I400 are both industrial tractors — here is how they stack up on the figures that matter. Allis Chalmers I400 leads on rated power with 41 hp against 25 hp. Allis Chalmers 710C is the newer design (1982 vs 1966). In short: choose the Allis Chalmers I400 for outright pulling power, or the Allis Chalmers 710C if a tighter budget and lighter footprint matter more. Compare the full spec tables below before booking a demo.
Tune the fit score
Tell us about your operation
Fit & specs
Allis Chalmers
62
Fit score
Best match
Clear
Allis Chalmers
62
Fit score
Best match
Clear
Rated power
25 hp
41 hp
Confidence
40%
40%
Guide price
—
—
Overview
Manufacturer
Allis ChalmersReference
Allis ChalmersReference
liquid-cooled inlineReference
liquid-cooledReference
Final drives
inboard planetaryReference
—
Engine
Engine
48.5 kWReference
30.3 kWReference
Displacement
3.3 LReference
2.4 LReference
Bore/Stroke
98 x 108 mmReference
89 x 98 mmReference
Power
48.5 kWReference
30.3 kWReference
Fuel system
direct injectionReference
—
Compression
14.1:1Reference
7.5:1Reference
Rated RPM
2300Reference
2000Reference
Idle RPM
775-2580Reference
—
Firing order
1-3-4-2Reference
1-2-4-3Reference
Starter
electricReference
—
Starter volts
12Reference
—
Coolant capacity
15.1 LReference
—
Oil capacity
11.4 LReference
—
Oil change
100 hReference
—
Transmission
Transmission
WarnerReference
—
Gears
4 forward and reverseReference
—
PTO & Hydraulics
PTO (claimed)
18.6 kWReference
—
Hydraulic system
102.2 LReference
—
Type
torque converterReference
—
Capacity
102.2 LReference
—
Rear valves
2Reference
—
Pump flow
41.6 lpmReference
56.8 lpmReference
Total flow
109.8 lpmReference
—
Steering flow
18.9 lpmReference
—
Steering press.
103.4 barReference
—
Rear Type
IIReference
—
Rear PTO
independentReference
—
Clutch
hydraulicReference
—
Rear PTO Type
540 (1.375)Reference
—
Engine RPM
540@2100Reference
—
Pressure
—
155.1 barReference
Capacities
Fuel
75.7 LReference
—
Dimensions
Wheelbase
213 cmReference
—
Front tire
11L-16Reference
7.50x16Reference
Rear tire
16.9-24Reference
14.9x24Reference
Industrial front
11L-16Reference
7.50x16Reference
Industrial rear
16.9-24Reference
14.9x24Reference
Width
210 cmReference
—
Height (ROPS)
251 cmReference
—
Ground clearance
33 cmReference
—
Front tread
170 cmReference
—
Rear tread
165 cmReference
—
Weight
—
1134 kgReference
Allis Chalmers 710C attachments
710C Serial Numbers
Location:
Serial number plate on the left side of the 710C, just behind the engine.Reference
—
Electrical
Ground
negativeReference
—
Charging system
alternatorReference
—
Charging amps
61Reference
—
Batteries
2Reference
—
Battery CCA
95Reference
—
Battery volts
12Reference
—
Battery Group
30HReference
—
Allis Chalmers I400 attachments
I400 Serial Numbers
1966
—
1003Reference
1967
—
1281Reference
1968
—
1495Reference
Final
—
1750Reference
Attachment overview
Allis Chalmers Backhoe
Backhoe type
—
Allis Chalmers BackhoeReference
Transport height
—
340 cmReference
Digging depth
—
398 cmReference
Reach from pivot
—
482 cmReference
Loading height
—
266 cmReference
Swing Arc
—
190°Reference
Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.