Search
Allis Chalmers 710C vs Allis Chalmers I600
Verdict: Allis Chalmers 710C vs Allis Chalmers I600
The Allis Chalmers 710C and the Allis Chalmers I600 are both industrial tractors — here is how they stack up on the figures that matter. Allis Chalmers I600 leads on rated power with 44 hp against 25 hp. Allis Chalmers 710C is the newer design (1982 vs 1966). In short: choose the Allis Chalmers I600 for outright pulling power, or the Allis Chalmers 710C if a tighter budget and lighter footprint matter more. Compare the full spec tables below before booking a demo.
Tune the fit score
Tell us about your operation
Fit & specs
Allis Chalmers
62
Fit score
Best match
Clear
Allis Chalmers
62
Fit score
Best match
Clear
Rated power
25 hp
44 hp
Confidence
40%
40%
Guide price
—
—
Overview
Manufacturer
Allis ChalmersReference
Allis ChalmersReference
liquid-cooled inlineReference
gasolineReference
Final drives
inboard planetaryReference
—
Engine
Engine
48.5 kWReference
32.8 kWReference
Displacement
3.3 LReference
2.6 LReference
Bore/Stroke
98 x 108 mmReference
92 x 92 mmReference
Power
48.5 kWReference
32.8 kWReference
Fuel system
direct injectionReference
—
Compression
14.1:1Reference
8:1Reference
Rated RPM
2300Reference
2000Reference
Idle RPM
775-2580Reference
—
Firing order
1-3-4-2Reference
—
Starter
electricReference
—
Starter volts
12Reference
12Reference
Coolant capacity
15.1 LReference
11.4 LReference
Oil capacity
11.4 LReference
4.7 LReference
Oil change
100 hReference
—
Fuel tank
—
60.6 LReference
Transmission
Transmission
WarnerReference
Power DirectorReference
Gears
4 forward and reverseReference
4 forward and reverseReference
PTO & Hydraulics
PTO (claimed)
18.6 kWReference
—
Hydraulic system
102.2 LReference
—
Type
torque converterReference
shuttleReference
Capacity
102.2 LReference
—
Rear valves
2Reference
—
Pump flow
41.6 lpmReference
58.7 lpmReference
Total flow
109.8 lpmReference
—
Steering flow
18.9 lpmReference
—
Steering press.
103.4 barReference
—
Rear Type
IIReference
IReference
Rear PTO
independentReference
liveReference
Clutch
hydraulicReference
wet discReference
Rear PTO Type
540 (1.375)Reference
1000 (1.375)Reference
Engine RPM
540@2100Reference
1000@1670Reference
Pressure
—
155.1 barReference
Control
—
lower-link draft sensingReference
Capacities
Fuel
75.7 LReference
—
Dimensions
Wheelbase
213 cmReference
220 cmReference
Front tire
11L-16Reference
6-16Reference
Rear tire
16.9-24Reference
12.4x24Reference
Industrial front
11L-16Reference
6-16Reference
Industrial rear
16.9-24Reference
16.9x24Reference
Width
210 cmReference
195 cmReference
Height (ROPS)
251 cmReference
—
Ground clearance
33 cmReference
45 cmReference
Front tread
170 cmReference
129/137 cmReference
Rear tread
165 cmReference
157/182 cmReference
Weight
—
2063 kgReference
Length
—
320 cmReference
Height (steering wheel)
—
160 cmReference
Height (hood)
—
144 cmReference
Allis Chalmers 710C attachments
710C Serial Numbers
Location:
Serial number plate on the left side of the 710C, just behind the engine.Reference
—
Electrical
Ground
negativeReference
—
Charging system
alternatorReference
—
Charging amps
61Reference
—
Batteries
2Reference
—
Battery CCA
95Reference
—
Battery volts
12Reference
—
Battery Group
30HReference
—
Allis Chalmers I600 attachments
I600 Serial Numbers
1966
—
1002Reference
1967
—
1747Reference
1968
—
2709Reference
Allis Chalmers 400 Backhoe
Backhoe type
—
Allis Chalmers 400 BackhoeReference
Digging depth
—
457 cmReference
Bucket Rotation
—
197°Reference
Swing Arc
—
190°Reference
Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.