Search
Allis Chalmers 714C vs Allis Chalmers 715
Verdict: Allis Chalmers 714C vs Allis Chalmers 715
The Allis Chalmers 714C and the Allis Chalmers 715 are both backhoe loaders — here is how they stack up on the figures that matter. Allis Chalmers 715 leads on rated power with 72 hp against 65 hp. Allis Chalmers 714C is the newer design (1982 vs 1974). In short: choose the Allis Chalmers 715 for outright pulling power, or the Allis Chalmers 714C if a tighter budget and lighter footprint matter more. Compare the full spec tables below before booking a demo.
Tune the fit score
Tell us about your operation
Fit & specs
Allis Chalmers
62
Fit score
Best match
Clear
Allis Chalmers
62
Fit score
Best match
Clear
Rated power
65 hp
72 hp
Confidence
40%
40%
Guide price
—
—
Overview
Manufacturer
Allis ChalmersReference
Allis ChalmersReference
liquid-cooled inlineReference
liquid-cooledReference
Final drives
inboard planetaryReference
inboard planetaryReference
Engine
Engine
48.5 kWReference
—
Displacement
3.3 LReference
3.9 LReference
Bore/Stroke
98 x 108 mmReference
98 x 127 mmReference
Power
48.5 kWReference
—
Fuel system
direct injectionReference
—
Compression
14.1:1Reference
16:1Reference
Rated RPM
2300Reference
2250Reference
Idle RPM
775-2580Reference
—
Firing order
1-3-4-2Reference
—
Starter
electricReference
electricReference
Starter volts
12Reference
12Reference
Coolant capacity
15.1 LReference
18.9 LReference
Oil capacity
11.4 LReference
11.4 LReference
Oil change
100 hReference
—
Engine (gross)
—
53.7 kWReference
Engine (net)
—
48.5 kWReference
Power (net)
—
48.5 kWReference
Power (gross)
—
53.7 kWReference
Torque
—
252.2 NmReference
Torque RPM
—
1400Reference
Transmission
Transmission
WarnerReference
WarnerReference
Gears
4 forward and reverseReference
4 forward and reverseReference
Capacities
Fuel
75.7 LReference
90.8 LReference
PTO & Hydraulics
Hydraulic system
102.2 LReference
151.4 LReference
Type
torque converterReference
torque converterReference
Capacity
102.2 LReference
151.4 LReference
Total flow
109.8 lpmReference
—
Steering flow
18.9 lpmReference
22.7 lpmReference
Steering press.
103.4 barReference
—
Pressure
—
155.1 barReference
Pump flow
—
6855.8 lpmReference
Dimensions
Wheelbase
213 cmReference
213 cmReference
Front tire
11L-16Reference
—
Rear tire
16.9-24Reference
—
Industrial front
11L-16Reference
—
Industrial rear
16.9-24Reference
—
Length
716 cmReference
687 cmReference
Width
210 cmReference
209 cmReference
Height (ROPS)
251 cmReference
248 cmReference
Height (backhoe)
345 cmReference
344 cmReference
Ground clearance
33 cmReference
—
Front tread
170 cmReference
170 cmReference
Rear tread
165 cmReference
165 cmReference
Weight
—
5992 kgReference
Operating
—
5992 kgReference
Max front axle
—
9072 kgReference
Max rear axle
—
5670 kgReference
Backhoe & Loader
Dig depth
431 cmReference
447 cmReference
Dump angle
114 cmReference
114 cmReference
714C Serial Numbers
Location:
Serial number plate on the left side of the frame, just behind the engine bay.Reference
—
Electrical
Ground
negativeReference
negativeReference
Charging system
alternatorReference
alternatorReference
Charging amps
61Reference
42Reference
Batteries
2Reference
—
Battery CCA
95Reference
—
Battery volts
12Reference
12Reference
Battery Group
30HReference
—
Attachment overview
Allis Chalmers 714C Backhoe
Backhoe type
Allis Chalmers 714C BackhoeReference
Allis Chalmers BackhoeReference
Transport height
345 cmReference
344 cmReference
Digging depth
431 cmReference
447 cmReference
Reach from pivot
535 cmReference
538 cmReference
Loading height
312 cmReference
304 cmReference
Swing Arc
180°Reference
180°Reference
Bucket force
4581 kgReference
4173 kgReference
Dipperstick force
3193 kgReference
3039 kgReference
Allis Chalmers Backhoe
2-Foot flat digging depth
—
436 cmReference
Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.