Search
Allis Chalmers 714C vs Allis Chalmers 715C
Verdict: Allis Chalmers 714C vs Allis Chalmers 715C
The Allis Chalmers 714C and the Allis Chalmers 715C are both backhoe loaders — here is how they stack up on the figures that matter. Both are rated at the same 65 hp. Use the full side-by-side spec tables below to weigh the details against your own operation, and confirm with a dealer demo.
Tune the fit score
Tell us about your operation
Fit & specs
Allis Chalmers
62
Fit score
Best match
Clear
Allis Chalmers
62
Fit score
Best match
Clear
Rated power
65 hp
65 hp
Confidence
40%
40%
Guide price
—
—
Overview
Manufacturer
Allis ChalmersReference
Allis ChalmersReference
liquid-cooled inlineReference
liquid-cooled inlineReference
Final drives
inboard planetaryReference
inboard planetaryReference
Engine
Engine
48.5 kWReference
48.5 kWReference
Displacement
3.3 LReference
3.3 LReference
Bore/Stroke
98 x 108 mmReference
98 x 108 mmReference
Power
48.5 kWReference
48.5 kWReference
Fuel system
direct injectionReference
direct injectionReference
Compression
14.1:1Reference
14.1:1Reference
Rated RPM
2300Reference
2300Reference
Idle RPM
775-2580Reference
775-2580Reference
Firing order
1-3-4-2Reference
1-3-4-2Reference
Starter
electricReference
electricReference
Starter volts
12Reference
12Reference
Coolant capacity
15.1 LReference
15.1 LReference
Oil capacity
11.4 LReference
11.4 LReference
Oil change
100 hReference
100 hReference
Transmission
Transmission
WarnerReference
WarnerReference
Gears
4 forward and reverseReference
4 forward and reverseReference
Capacities
Fuel
75.7 LReference
75.7 LReference
PTO & Hydraulics
Hydraulic system
102.2 LReference
102.2 LReference
Type
torque converterReference
torque converterReference
Capacity
102.2 LReference
102.2 LReference
Total flow
109.8 lpmReference
109.8 lpmReference
Steering flow
18.9 lpmReference
18.9 lpmReference
Steering press.
103.4 barReference
103.4 barReference
Dimensions
Wheelbase
213 cmReference
213 cmReference
Front tire
11L-16Reference
11L-16Reference
Rear tire
16.9-24Reference
16.9-24Reference
Industrial front
11L-16Reference
11L-16Reference
Industrial rear
16.9-24Reference
16.9-24Reference
Length
716 cmReference
716 cmReference
Width
210 cmReference
210 cmReference
Height (ROPS)
251 cmReference
251 cmReference
Height (backhoe)
345 cmReference
345 cmReference
Ground clearance
33 cmReference
33 cmReference
Front tread
170 cmReference
170 cmReference
Rear tread
165 cmReference
165 cmReference
Weight
—
6441 kgReference
Operating weight
—
6441 kgReference
Backhoe & Loader
Dig depth
431 cmReference
447 cmReference
Dump angle
114 cmReference
114 cmReference
714C Serial Numbers
Location:
Serial number plate on the left side of the frame, just behind the engine bay.Reference
Serial number plate on the left side of the frame, just behind the engine bay.Reference
Electrical
Ground
negativeReference
negativeReference
Charging system
alternatorReference
alternatorReference
Charging amps
61Reference
61Reference
Batteries
2Reference
2Reference
Battery CCA
95Reference
95Reference
Battery volts
12Reference
12Reference
Battery Group
30HReference
30HReference
Attachment overview
Allis Chalmers 714C Backhoe
Backhoe type
Allis Chalmers 714C BackhoeReference
Allis Chalmers 715C BackhoeReference
Transport height
345 cmReference
345 cmReference
Digging depth
431 cmReference
447 cmReference
Reach from pivot
535 cmReference
566 cmReference
Loading height
312 cmReference
330 cmReference
Swing Arc
180°Reference
180°Reference
Bucket force
4581 kgReference
4581 kgReference
Dipperstick force
3193 kgReference
3592 kgReference
715C Serial Numbers
Allis Chalmers 715C Backhoe
Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.