Search
Allis Chalmers All-Crop vs Allis Chalmers FD3
Verdict: Allis Chalmers All-Crop vs Allis Chalmers FD3
The Allis Chalmers All-Crop and the Allis Chalmers FD3 are both tractors — here is how they stack up on the figures that matter. Both are rated at the same 25 hp. Allis Chalmers FD3 is the lighter machine (1,428 kg vs 2,705 kg), which helps on soft ground and transport, while the heavier model carries more ballast for traction-limited draft work. Use the full side-by-side spec tables below to weigh the details against your own operation, and confirm with a dealer demo.
Tune the fit score
Tell us about your operation
Fit & specs
Allis Chalmers
62
Fit score
Best match
Clear
Allis Chalmers
62
Fit score
Best match
Clear
Rated power
25 hp
25 hp
Confidence
40%
40%
Guide price
—
—
Overview
Manufacturer
Allis ChalmersReference
Allis ChalmersReference
Gear 1 used for pull test.Reference
liquid-cooledReference
Engine
Plows
3Reference
—
Drawbar (tested)
18.6 kWReference
—
Belt (tested)
26.9 kWReference
—
Displacement
4.6 LReference
1.6 LReference
Bore/Stroke
108 x 127 mmReference
79 x 89 mmReference
Air cleaner
oil bathReference
—
Rated RPM
1200Reference
2200Reference
Starter type
hand-crankReference
—
Coolant capacity
18.9 LReference
—
Belt power (max)
26.9 kWReference
—
Max power
18.6 kWReference
—
Fuel tank
—
45.0 LReference
Engine
—
18.6 kWReference
Power
—
18.6 kWReference
Oil capacity
—
7.0 LReference
Transmission
Type
non-synchronized gearReference
—
Gears
3 forward and 1 reverseReference
8 forward and 4 reverseReference
Clutch
304.8mm mechanical dry discReference
dry discReference
Dimensions
Wheelbase
221 cmReference
—
Weight
2705 kgReference
1428 kgReference
Front tire
24x5Reference
450x16Reference
Rear tire
42x2Reference
10x28Reference
Ag front
24x5 (steel)Reference
450x16Reference
Ag rear
42x2 (steel)Reference
10x28Reference
Length
317 cmReference
284 cmReference
Height
168 cmReference
—
Operating weight
2705 kgReference
—
Height (steering wheel)
—
130 cmReference
Front tread
—
113 to 153 cmReference
Rear tread
—
128 to 167 cmReference
All-Crop Serial Numbers
1930
UC1Reference
—
1931
UC1939Reference
—
1932
UC1100Reference
—
1933
UC1232Reference
—
Location:
Rear axle near PTOReference
—
Final
UC1268Reference
—
Capacities
Diameter
25 cmReference
—
Width
19 cmReference
—
RPM
1095Reference
—
Speed
874.78 meters/minReference
—
Test results
Belt fuel use (max)
15.5 l/hourReference
—
Max pull
1706 kgReference
—
PTO & Hydraulics
Rear PTO Type
—
540/1000Reference
Mid PTO Type
—
1000Reference
FD3 Serial Number Location
Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.