Compare/Allis Chalmers D15 Series II vs Allis Chalmers FD5
Search

Allis Chalmers D15 Series II vs Allis Chalmers FD5

Verdict: Allis Chalmers D15 Series II vs Allis Chalmers FD5

The Allis Chalmers D15 Series II and the Allis Chalmers FD5 are both tractors — here is how they stack up on the figures that matter. Allis Chalmers FD5 leads on rated power with 50 hp against 46 hp. Allis Chalmers FD5 is the lighter machine (2,454 kg vs 4,025 kg), which helps on soft ground and transport, while the heavier model carries more ballast for traction-limited draft work. Allis Chalmers FD5 is the newer design (1963 vs 1960). In short: choose the Allis Chalmers FD5 for outright pulling power, or the Allis Chalmers D15 Series II if a tighter budget and lighter footprint matter more. Compare the full spec tables below before booking a demo.

Tune the fit score
Tell us about your operation
Fit & specs
Allis Chalmers D15 Series II Tractor
Allis Chalmers
62
Fit score
Best match
Clear
Allis Chalmers FD5 Tractor
Allis Chalmers
62
Fit score
Best match
Clear
Rated power
46 hp
50 hp
Confidence
40%
40%
Guide price
Overview
Manufacturer
Allis ChalmersReference
Allis ChalmersReference
The shuttle transmission is controlled using the gear shift lever and the shuttle control lever. The tractor must be stopped, and clutch used, to select one of four speeds with the gear shift. The shuttle control lever enables a shift between forward, reverse, or neutral without clutching. A PTO could be ordered on the industrial D15 with the shuttle, but it ran at 875 RPMs.Reference
Four speeds (1-4) in two ranges.Reference
Total built
12,356Reference
Steering
power optionalReference
Engine
Drawbar (tested)
28.6 kWReference
Displacement
2.9 LReference
4.0 LReference
Bore/Stroke
90 x 111 mmReference
115 x 130 mmReference
Fuel use
16.7 l/hourReference
Air cleaner
paper element with pre-cleanerReference
Compression
15.5:1Reference
Rated RPM
2000Reference
1800Reference
Firing order
1-3-4-2Reference
Starter volts
12Reference
12Reference
Coolant capacity
11.4 LReference
Sparkplug
Auto-Lite A-5Reference
Sparkplug gap
0.635 mmReference
Point gap
0.559 mmReference
Intake valve clearance
0.254 mmReference
Exhaust valve clearance
0.483 mmReference
Oil capacity
14.0 LReference
25.0 LReference
Power at rated engine speed
32.5 kWReference
Max power
26.9 kWReference
Engine
37.3 kWReference
Power
37.3 kWReference
Transmission
Transmission
shuttleReference
Gears
4 forward and reverseReference
8 forward and 4 reverseReference
Oil type
SAE80EPReference
PTO & Hydraulics
PTO (tested)
34.4 kWReference
Hydraulic system
9.5 LReference
18.0 LReference
Capacity
9.5 LReference
18.0 LReference
Pressure
158.6 barReference
Valves
0 to 3Reference
Rear Type
II/IReference
IIReference
Type
partial power shiftReference
Power at rated PTO speed
29.6 kWReference
Rear PTO Type
540 (1.375)Reference
Engine RPM
540@1080Reference
Capacities
Fuel
59.6 LReference
70.0 LReference
Diameter
22 cmReference
27 cmReference
Width
170 cmReference
175 cmReference
RPM
1678Reference
1280Reference
Speed
1205.79 meters/minReference
Dimensions
Weight
4025 to 4525 poundsReference
2454 kgReference
Front tire
5.50x16Reference
5.50x20Reference
Rear tire
12.4x26Reference
12x38Reference
Ag front
6.50x16Reference
5.50x20Reference
Ag rear
14.9x26Reference
12x38Reference
Length
330 cmReference
329 cmReference
Height (hood)
145 cmReference
Height (exhaust)
203 cmReference
Clearance (front axle)
53 cmReference
Clearance (rear axle)
62 cmReference
Front tread
129 to 198 cmReference
Rear tread
137 to 223 cmReference
Shipping
2052 kgReference
Operating
1855 kgReference
Ballasted
3676 kgReference
Wheelbase
228 cmReference
Height
160 cmReference
Ground clearance
49 cmReference
D15 Series II Serial Number Location
D15 Series II Serial Numbers
1963
13001Reference
1964
16928Reference
1965
19681Reference
1966
21375Reference
1967
23734Reference
1968
25127Reference
Final
25419Reference
Electrical
Ground
positiveReference
negativeReference
Batteries
2 (diesel)Reference
2Reference
Battery volts
12Reference
6Reference
Battery AH
70Reference
Test results
Max pull
2924 kgReference
Speeds

Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.

Comparing 0
Compare (pick 2+)