Compare/Allis Chalmers HD10 vs Allis Chalmers HD9
Search

Allis Chalmers HD10 vs Allis Chalmers HD9

Verdict: Allis Chalmers HD10 vs Allis Chalmers HD9

The Allis Chalmers HD10 and the Allis Chalmers HD9 are both tractors — here is how they stack up on the figures that matter. Allis Chalmers HD9 leads on rated power with 70 hp against 65 hp. Allis Chalmers HD9 is the lighter machine (8,527 kg vs 20,380 kg), which helps on soft ground and transport, while the heavier model carries more ballast for traction-limited draft work. Allis Chalmers HD9 holds more fuel (208.2 L vs 166.5 L) for longer stints between fills. Allis Chalmers HD9 is the newer design (1951 vs 1940). In short: choose the Allis Chalmers HD9 for outright pulling power, or the Allis Chalmers HD10 if a tighter budget and lighter footprint matter more. Compare the full spec tables below before booking a demo.

Tune the fit score
Tell us about your operation
Fit & specs
Allis Chalmers HD10 Tractor
Allis Chalmers
62
Fit score
Best match
Clear
Allis Chalmers HD9 Tractor
Allis Chalmers
62
Fit score
Best match
Clear
Rated power
65 hp
70 hp
Confidence
40%
40%
Guide price
Overview
Manufacturer
Allis ChalmersReference
Allis ChalmersReference
Gear 1 used for pull test.Reference
Gear 1 used for pull test.Reference
Total built
8,750Reference
5,850Reference
Drive
crawlerReference
crawlerReference
Engine
Fuel tank
166.5 LReference
208.2 LReference
Drawbar (claimed)
48.5 kWReference
52.2 kWReference
Belt (claimed)
64.1 kWReference
62.6 kWReference
Drawbar (tested)
61.3 kWReference
50.3 kWReference
Belt (tested)
73.5 kWReference
59.0 kWReference
Displacement
4.7 LReference
4.7 LReference
Bore/Stroke
108 x 127 mmReference
108 x 127 mmReference
Compression
16.0:1Reference
16.0:1Reference
Rated RPM
1600Reference
1600Reference
Starter volts
12Reference
12Reference
Oil capacity
22.7 LReference
25.6 LReference
Coolant capacity
36.9 LReference
27.4 LReference
Belt power (max)
73.5 kWReference
59.0 kWReference
Max power
61.3 kWReference
50.3 kWReference
Transmission
Transmission
sliding gearReference
Gears
6 forward and 2 reverseReference
6 forward and 3 reverseReference
Type
gearReference
Dimensions
Weight
20380 to 21455 poundsReference
8527 kgReference
Length
381 cmReference
381 cmReference
Height
198 cmReference
185 cmReference
Gauge
157 cmReference
187 cmReference
Shipping
9548 kgReference
Shipping weight
8527 kgReference
HD10 Serial Numbers
1940
2Reference
1941
642Reference
1942
1446Reference
1946
5964Reference
1947
6463Reference
1948
7602Reference
1949
8676Reference
1950
9631Reference
1Reference
Location:
Rear of transmission case or plate near instrument panel.Reference
Steering clutch housing or instrument panelReference
Final
10198Reference
5850Reference
Allis Chalmers HD10 Tracks
Width
238 cmReference
241 cmReference
Length on ground
195 cmReference
Area on ground
1.8 m²Reference
Ground pressure
0.5 barReference
Test results
Max pull
7033 kgReference
8634 kgReference
HD9 Serial Numbers
1951
2Reference
1952
738Reference
1953
1883Reference
1954
3591Reference
1955
5209Reference
Allis Chalmers HD9 Tracks

Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.

Comparing 0
Compare (pick 2+)