Search
Allis Chalmers K-O vs Nichols-Shepard 25-50
Verdict: Allis Chalmers K-O vs Nichols-Shepard 25-50
The Allis Chalmers K-O and the Nichols-Shepard 25-50 are both tractors — here is how they stack up on the figures that matter. Both are rated at the same 50 hp. Allis Chalmers K-O is the lighter machine (5,216 kg vs 8,618 kg), which helps on soft ground and transport, while the heavier model carries more ballast for traction-limited draft work. Allis Chalmers K-O is the newer design (1934 vs 1913). Use the full side-by-side spec tables below to weigh the details against your own operation, and confirm with a dealer demo.
Tune the fit score
Tell us about your operation
Fit & specs
Allis Chalmers
62
Fit score
Best match
Clear
Nichols-Shepard
62
Fit score
Best match
Clear
Rated power
50 hp
50 hp
Confidence
40%
40%
Guide price
—
—
Overview
Manufacturer
Allis ChalmersReference
Nichols-ShepardReference
The three-speed transmission was used on early models, built during 1934.Reference
liquid-cooledReference
Drive
crawlerReference
—
Final drives
—
bull gearReference
Variants
K
gasolineReference
—
WK
wide gasReference
—
K-O
dieselReference
—
WK-O
wide dieselReference
—
Engine
Drawbar (tested)
37.6 kWReference
—
Belt (tested)
44.0 kWReference
—
Displacement
9.2 LReference
25.0 LReference
Bore/Stroke
133 x 165 mmReference
229 x 305 mmReference
Fuel system
mechanical injectionReference
—
Air cleaner
oil bathReference
—
Compression
6.5:1Reference
—
Rated RPM
1050Reference
—
Belt power (max)
44.0 kWReference
—
Max power
37.6 kWReference
—
Fuel tank
—
151.4 LReference
Aux. fuel
—
22.7 LReference
Drawbar (claimed)
—
37.3 kWReference
Belt (claimed)
—
18.6 kWReference
Plows
—
5 (14-inch)Reference
Transmission
Type
gearReference
gearReference
Gears
4 forward and 1 reverseReference
1 forward and reverseReference
Clutch
—
dry drumReference
Dimensions
Weight
5216 kgReference
8618 kgReference
Length
303 cmReference
505 cmReference
KO Width
167 cmReference
—
Height (hood)
162 cmReference
—
KO Gauge
121 cmReference
—
WKO Gauge
160 cmReference
—
Front tire
—
42x10Reference
Rear tire
—
69x28Reference
Ag front
—
42x10 steelReference
Ag rear
—
69x28 steelReference
Height
—
287 cmReference
Rear axle
—
114 mmReference
Allis Chalmers K-O Tracks
Width
38 cmReference
294 cmReference
Test results
Belt fuel use (max)
17.4 l/hourReference
—
Max pull
5300 kgReference
—
Capacities
Diameter
—
60 cmReference
RPM
—
425Reference
Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.


