Compare/Allis Chalmers M vs Allis Chalmers U
Search

Allis Chalmers M vs Allis Chalmers U

Verdict: Allis Chalmers M vs Allis Chalmers U

The Allis Chalmers M and the Allis Chalmers U are both tractors — here is how they stack up on the figures that matter. Allis Chalmers M leads on rated power with 22 hp against 20 hp. Allis Chalmers U is the lighter machine (2,086 kg vs 2,812 kg), which helps on soft ground and transport, while the heavier model carries more ballast for traction-limited draft work. Allis Chalmers M is the newer design (1932 vs 1929). In short: choose the Allis Chalmers M for outright pulling power, or the Allis Chalmers U if a tighter budget and lighter footprint matter more. Compare the full spec tables below before booking a demo.

Tune the fit score
Tell us about your operation
Fit & specs
Allis Chalmers M Tractor
Allis Chalmers
62
Fit score
Best match
Clear
Allis Chalmers U Tractor
Allis Chalmers
62
Fit score
Best match
Clear
Rated power
22 hp
20 hp
Confidence
40%
40%
Guide price
Overview
Manufacturer
Allis ChalmersReference
Allis ChalmersReference
Gear 2 used for power test.Reference
The four-speed transmission was offered on tractors equipped with rubber tires.Reference
Total built
14,524Reference
19,009Reference
Drive
crawlerReference
Variants
M
standard widthReference
WM
wideReference
U
standardReference
UC
row-cropReference
Engine
Fuel tank
90.8 LReference
90.8 LReference
Drawbar (claimed)
16.4 kWReference
14.9 kWReference
Belt (claimed)
23.9 kWReference
23.1 kWReference
Drawbar (tested)
22.1 kWReference
22.6 kWReference
Belt (tested)
26.4 kWReference
26.1 kWReference
Displacement
5.2 LReference
5.2 LReference
Bore/Stroke
114 x 127 mmReference
114 x 127 mmReference
Air cleaner
oil bathReference
Compression
4.7:1 (late)Reference
Rated RPM
1200Reference
1200Reference
Starter volts
6Reference
Oil capacity
11.4 LReference
Coolant capacity
22.7 LReference
18.9 LReference
Belt power (max)
26.1 kWReference
25.4 kWReference
Max power
21.4 kWReference
22.6 kWReference
Plows
3 (14-inch)Reference
Transmission
Type
gearReference
Gears
4 forward and 1 reverseReference
4 forward and 1 reverseReference
Clutch
Rockford dry plateReference
Dimensions
Weight
2812 kgReference
2086 kgReference
Length
257 cmReference
300 cmReference
Height
142 cmReference
135 cmReference
Gauge
101 cmReference
Front tire
28x6Reference
Rear tire
42x11Reference
Ag front
6.00x16Reference
Ag rear
12.75x24Reference
M Serial Numbers
1932
1Reference
7262Reference
1933
42Reference
7419Reference
1934
402Reference
7685Reference
1935
842Reference
8063Reference
1936
1942Reference
9471Reference
1937
3842Reference
12822Reference
1938
7067Reference
14855Reference
1939
8127Reference
15587Reference
1940
9540Reference
16078Reference
1941
11380Reference
16722Reference
1942
12947Reference
17137Reference
Location:
Right side of transmission caseReference
Rear of differential, near PTOReference
Allis Chalmers M Tracks
Width
145 cmReference
160 cmReference
Length on ground
143 cmReference
Area on ground
0.9 m²Reference
Ground pressure
0.3 barReference
Test results
Belt fuel use (max)
15.9 l/hourReference
15.5 l/hourReference
Max pull
2272 kgReference
1112 kgReference
U Serial Numbers
1929
1Reference
1930
1975Reference
1931
6554Reference
1943
17470Reference
1944
17802Reference
1945
-unknown-Reference
1946
-unknown-Reference
1947
18309, 20174Reference
1948
18613, 20179, 21000Reference
1949
20301, 210036, 22018Reference
1950
20422, 22024Reference

Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.

Comparing 0
Compare (pick 2+)