Search
CaseIH 695 vs CaseIH Farmall 80
Verdict: CaseIH 695 vs CaseIH Farmall 80
The CaseIH 695 and the CaseIH Farmall 80 are both tractors — here is how they stack up on the figures that matter. Both are rated at the same 72 hp. CaseIH Farmall 80 is the lighter machine (5,702 kg vs 5,720 kg), which helps on soft ground and transport, while the heavier model carries more ballast for traction-limited draft work. CaseIH Farmall 80 is the newer design (2008 vs 1991). Use the full side-by-side spec tables below to weigh the details against your own operation, and confirm with a dealer demo.
Tune the fit score
Tell us about your operation
Fit & specs
CaseIH
62
Fit score
Best match
Clear
CaseIH
62
Fit score
Best match
Clear
Rated power
72 hp
72 hp
Confidence
40%
40%
Guide price
—
—
Overview
Manufacturer
CaseIHReference
Turk TractorReference
Four gears with high, low, and reverse ranges plus direct or creeper mode.Reference
Three ranges with four gears per range. Left-hand reverser requires use of clutch to change directionsReference
Distributor
—
CaseIHReference
Differential lock
—
mechanical rearReference
Engine
Engine (gross)
53.7 kWReference
53.7 kWReference
Engine (net)
50.7 kWReference
—
Drawbar (tested)
39.4 kWReference
44.5 kWReference
Displacement
3.9 LReference
3.2 LReference
Bore/Stroke
98 x 129 mmReference
99 x 104 mmReference
Power (net)
50.7 kWReference
—
Power (gross)
53.7 kWReference
53.7 kWReference
Air cleaner
dual paper elementsReference
dual dry elementsReference
Compression
16:1Reference
—
Rated RPM
2400Reference
2500Reference
Idle RPM
650-2705Reference
—
Starter volts
12Reference
12Reference
Oil capacity
34.1 LReference
—
Coolant capacity
13.7 LReference
—
Power at rated engine speed
45.5 kWReference
52.4 kWReference
Max power
39.4 kWReference
44.5 kWReference
Fuel tank
—
90.1 LReference
Emissions
—
Tier 3Reference
Fuel system
—
direct injection with mechanical governorReference
Pre-heating
—
thermostartReference
Starter
—
electricReference
Transmission
Gears
8 forward and reverseReference
20 forward and 12 reverseReference
Clutch
dry discReference
mechanical dry discReference
PTO & Hydraulics
PTO (claimed)
46.2 kWReference
46.2 kWReference
PTO (tested)
45.5 kWReference
53.8 kWReference
Hydraulic system
34.1 LReference
—
Type
creeperReference
mechanical shuttle with creeperReference
Capacity
34.1 LReference
—
Valves
1Reference
—
Pump flow
59.8 lpmReference
51.5 lpmReference
Rear Type
IIReference
IIReference
Rear lift
1639 kgReference
—
Rear PTO
independentReference
independentReference
Rear PTO Type
540/1000Reference
540 (1.375)Reference
Power at rated PTO speed
43.8 kWReference
52.9 kWReference
Rear valves
—
1 to 3Reference
Total flow
—
82.1 lpmReference
Steering flow
—
30.7 lpmReference
Control
—
position control and mechanical lower-link draft sensingReference
Rear lift (at 24"/610mm)
—
2279 kgReference
Capacities
ROPS Fuel
75.7 LReference
—
Cab Fuel
111.7 LReference
—
Dimensions
Wheelbase
225 cmReference
—
Weight
5720 to 7585 poundsReference
5702 to 6915 poundsReference
Front tire
7.50-16Reference
—
Rear tire
14.9-24Reference
—
Ag front
7.50-16Reference
—
Ag rear
14.9-24Reference
—
Length
360 cmReference
—
Width
190 cmReference
—
Height (ROPS)
245 cmReference
256 cmReference
Height (cab)
255 cmReference
261 cmReference
2WD Clearance (front axle)
52 cmReference
—
4WD Clearance (front axle)
36 cmReference
—
2WD ROPS Shipping
2594 kgReference
—
2WD Cab Shipping
2957 kgReference
—
$WD Cab Shipping
3077 kgReference
—
4WD Cab Shipping
3440 kgReference
—
Ballasted
4012 kgReference
—
2WD Wheelbase
—
231 cmReference
4WD Wheelbase
—
220 cmReference
Shipping
—
3136 kgReference
CaseIH 695 attachments
Electrical
Ground
negativeReference
negativeReference
Charging system
alternatorReference
alternatorReference
Battery volts
12Reference
12Reference
Charging amps
—
85Reference
Battery CCA
—
800Reference
Attachment overview
Test results
Fuel use
15.1 l/hourReference
15.9 l/hourReference
Max pull
—
2175 kgReference
Speeds
Variants
TD5030
—
similar New Holland modelReference
CaseIH Farmall 80 attachments
Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.