Compare/Farmall 100 vs Farmall C
Search

Farmall 100 vs Farmall C

Verdict: Farmall 100 vs Farmall C

The Farmall 100 and the Farmall C are both tractors — here is how they stack up on the figures that matter. Farmall C leads on rated power with 19 hp against 18 hp. Farmall C is the lighter machine (1,290 kg vs 2,600 kg), which helps on soft ground and transport, while the heavier model carries more ballast for traction-limited draft work. Farmall 100 is the newer design (1954 vs 1948). In short: choose the Farmall C for outright pulling power, or the Farmall 100 if a tighter budget and lighter footprint matter more. Compare the full spec tables below before booking a demo.

Tune the fit score
Tell us about your operation
Fit & specs
Farmall 100 Tractor
Farmall
62
Fit score
Best match
Clear
Farmall C Tractor
Farmall
62
Fit score
Best match
Clear
Rated power
18 hp
19 hp
Confidence
40%
40%
Guide price
Overview
Manufacturer
Farmall (a part of International Harvester)Reference
Farmall (a part of International Harvester)Reference
Gear 1 used for pull test.Reference
Gear 1 used for pull test.Reference
Total built
16,191Reference
79,932Reference
Original price
$1,500Reference
Variants
IH 100
utility tractorReference
Farmall 100
row-crop tractorReference
100HC
High ClearanceReference
Engine
Fuel tank
41.6 LReference
41.6 LReference
Plows
1Reference
Drawbar (tested)
13.3 kWReference
13.8 kWReference
Belt (tested)
15.0 kWReference
15.7 kWReference
Displacement
2.0 LReference
1.9 LReference
Bore/Stroke
79 x 102 mmReference
76 x 102 mmReference
Air cleaner
oil bathReference
oil bathReference
Compression
6.5:1Reference
5.33:1Reference
Rated RPM
1400Reference
1650Reference
Idle RPM
900-1400Reference
525-1850Reference
Firing order
1-3-4-2Reference
1-3-4-2Reference
Starter volts
6Reference
Oil capacity
4.7 LReference
4.7 LReference
Belt power (max)
15.0 kWReference
15.7 kWReference
Max power
13.3 kWReference
13.8 kWReference
Sparkplug gap
0.635 mmReference
Point gap
0.508 mmReference
Intake valve clearance
0.356 mmReference
Exhaust valve clearance
0.356 mmReference
Transmission
Gears
4 forward and 1 reverseReference
4 forward and 1 reverseReference
Clutch
dry discReference
PTO & Hydraulics
Type
gearReference
sliding gearReference
Rear PTO Type
540Reference
540Reference
Engine RPM
541@1400Reference
540@1650Reference
Dimensions
Wheelbase
180 cmReference
207 cmReference
Weight
2600 to 3000 poundsReference
1290 kgReference
Front tire
5.00-15Reference
4.00-15Reference
Rear tire
9-24Reference
9-36Reference
Ag front
5.00-15Reference
4.00-15Reference
Ag rear
9-24Reference
10-36Reference
Length
271 cmReference
305 cmReference
Height (steering wheel)
166 cmReference
178 cmReference
Clearance (rear axle)
54 cmReference
Front tread
111 to 162 cmReference
Rear tread
101 to 172 cmReference
Shipping
1179 kgReference
Operating
1360 kgReference
Ballasted
1965 kgReference
Operating weight
1290 kgReference
Farmall 100 attachments
100 Serial Numbers
1954
501Reference
1955
1720Reference
1956
12895Reference
Final
18940Reference
Capacities
Diameter
21 cmReference
Width
142 cmReference
RPM
1157Reference
Speed
784.56 meters/minReference
Test results
Belt fuel use (max)
7.9 l/hourReference
7.2 l/hourReference
Max pull
1135 kgReference
1316 kgReference
C Serial Number Location
C Serial Numbers
1948
FC501Reference
1949
FC22624Reference
1950
FC47010Reference
1951
FC71880Reference

Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.

Comparing 0
Compare (pick 2+)