Search
Farmall 300 vs Farmall MD
Verdict: Farmall 300 vs Farmall MD
The Farmall 300 and the Farmall MD are both tractors — here is how they stack up on the figures that matter. Both are rated at the same 35 hp. Farmall MD is the lighter machine (2,268 kg vs 2,431 kg), which helps on soft ground and transport, while the heavier model carries more ballast for traction-limited draft work. Farmall MD holds more fuel (75.7 L vs 64.3 L) for longer stints between fills. Farmall 300 is the newer design (1954 vs 1941). Use the full side-by-side spec tables below to weigh the details against your own operation, and confirm with a dealer demo.
Tune the fit score
Tell us about your operation
Fit & specs
Farmall
62
Fit score
Best match
Clear
Farmall
62
Fit score
Best match
Clear
Rated power
35 hp
35 hp
Confidence
40%
40%
Guide price
—
—
Overview
Manufacturer
Farmall (a part of International Harvester)Reference
Farmall (a part of International Harvester)Reference
Gear 3 used for power test.Reference
Diesel 5-speed 2WDJune 1 - 16, 1951Link: Nebraska Tractor Test 460 fileReference
Total built
170 (High-Clearance)Reference
18,253Reference
Final drives
bull gearReference
—
Steering
—
manualReference
Variants
IH 300
utility tractorReference
—
Farmall 300 High-Clearance
high-crop tractorReference
—
WD-6
—
standard-frontReference
ID-6
—
industrialReference
M
—
gasoline engineReference
Engine
Fuel tank
64.3 LReference
75.7 LReference
Plows
3Reference
3 (14-inch)Reference
Drawbar (tested)
26.4 kWReference
25.0 kWReference
Belt (tested)
28.6 kWReference
28.5 kWReference
Displacement
2.8 LReference
4.1 LReference
Bore/Stroke
90 x 108 mmReference
98 x 133 mmReference
Air cleaner
oil bathReference
—
Compression
6.6:1Reference
16.8:1Reference
Rated RPM
1750Reference
1450Reference
Idle RPM
900-1750Reference
—
Starter volts
6Reference
12Reference
Coolant capacity
15.6 LReference
28.4 LReference
Belt power (max)
28.6 kWReference
28.5 kWReference
Max power
26.4 kWReference
25.0 kWReference
Aux. fuel
—
3.8 LReference
Firing order
—
1-3-4-2Reference
Transmission
Gears
10 forward and 2 reverseReference
5 forward and 1 reverseReference
Transmission
Torque AmplifierReference
—
PTO & Hydraulics
Type
two-speed power shiftReference
sliding gearReference
Valves
1 to 3Reference
—
Rear PTO
independentReference
—
Rear PTO Type
540 (1.375)Reference
540Reference
PTO (claimed)
—
26.1 kWReference
Pressure
—
55.2 barReference
Dimensions
Wheelbase
243 cmReference
—
Weight
2431 kgReference
2268 kgReference
Front tire
5.50-16Reference
6.50-16Reference
Rear tire
11-38Reference
12-38Reference
Ag front
7.50-16Reference
22.50x4 steelReference
Ag rear
13-38Reference
51x8 steelReference
Length
355 cmReference
322 cmReference
Width
254 cmReference
215 cmReference
Height (steering wheel)
223 cmReference
—
Clearance (rear axle)
64 cmReference
—
Bar rear axle
69 mmReference
69 mmReference
Front tread
144 to 227 cmReference
—
Rear tread
121 to 254 cmReference
—
Height
—
198 cmReference
Operating weight
—
2268 kgReference
Ballasted weight
—
3433 kgReference
Farmall 300 attachments
300 Serial Numbers
1954
501Reference
—
1955
1779Reference
—
1956
23224Reference
—
Location:
Serial number on the left side of the clutch housing.Reference
—
Electrical
Ground
positiveReference
positiveReference
Battery volts
6Reference
6Reference
Batteries
—
2Reference
Attachment overview
Test results
Belt fuel use (max)
16.7 l/hourReference
10.2 l/hourReference
Max pull
2529 kgReference
2291 kgReference
MD Serial Numbers
1941
—
25371Reference
1942
—
50988Reference
1943
—
60011Reference
1944
—
67424Reference
1945
—
88085Reference
1946
—
105564Reference
1947
—
122823Reference
1948
—
151708Reference
1949
—
180514Reference
1950
—
213579Reference
1951
—
247518Reference
1952
—
290923Reference
Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.


