Search
General Ordnance 14-28 G vs Twin City KT
Verdict: General Ordnance 14-28 G vs Twin City KT
The General Ordnance 14-28 G and the Twin City KT are both tractors — here is how they stack up on the figures that matter. Both are rated at the same 14 hp. General Ordnance 14-28 G is the lighter machine (1,905 kg vs 1,950 kg), which helps on soft ground and transport, while the heavier model carries more ballast for traction-limited draft work. Twin City KT is the newer design (1929 vs 1919). Use the full side-by-side spec tables below to weigh the details against your own operation, and confirm with a dealer demo.
Tune the fit score
Tell us about your operation
Fit & specs
General Ordnance
62
Fit score
Best match
Clear
Twin City
62
Fit score
Best match
Clear
Rated power
14 hp
14 hp
Confidence
40%
40%
Guide price
—
—
Overview
Manufacturer
General OrdnanceReference
Twin City (a part of Minneapolis-Moline)Reference
liquid-cooledReference
Gear 1 used for pull test.Reference
Total built
—
2,078Reference
Final drives
—
bull gearReference
Engine
Drawbar (claimed)
10.4 kWReference
10.4 kWReference
Belt (claimed)
20.9 kWReference
17.2 kWReference
Plows
3Reference
—
Displacement
6.0 LReference
4.6 LReference
Bore/Stroke
114 x 146 mmReference
108 x 127 mmReference
Fuel tank
—
90.8 LReference
Aux. fuel
—
11.4 LReference
Drawbar (tested)
—
14.1 kWReference
Belt (tested)
—
19.3 kWReference
Fuel system
—
carburetorReference
Rated RPM
—
1000Reference
Starter type
—
hand-crankReference
Oil capacity
—
11.4 LReference
Coolant capacity
—
22.7 LReference
Belt power (max)
—
19.3 kWReference
Max power
—
14.1 kWReference
Transmission
Type
friction discReference
gearReference
Gears
6 forward and reverseReference
3 forward and 1 reverseReference
Clutch
—
dry discReference
Dimensions
Weight
1905 kgReference
1950 kgReference
Rear tire
46x10Reference
42x10Reference
Ag rear
46x10 steelReference
42x10 (steel)Reference
Length
312 cmReference
332 cmReference
Height
152 cmReference
163 cmReference
Wheelbase
—
198 cmReference
Front tire
—
28x5Reference
Ag front
—
28x5 (steel)Reference
Flange rear axle
—
69 mmReference
Capacities
Diameter
25 cmReference
35 cmReference
Width
180 cmReference
149 cmReference
RPM
—
715Reference
PTO & Hydraulics
Rear PTO
—
tranmissionReference
KT Serial Numbers
Location:
—
Serial number on the top-right of transmissionReference
Test results
Belt fuel use (max)
—
9.8 l/hourReference
Max pull
—
1512 kgReference
Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.