Compare/International Harvester 1086B vs International Harvester 806
Search

International Harvester 1086B vs International Harvester 806

Verdict: International Harvester 1086B vs International Harvester 806

The International Harvester 1086B and the International Harvester 806 are both tractors — here is how they stack up on the figures that matter. International Harvester 1086B leads on rated power with 98 hp against 95 hp. International Harvester 1086B is the lighter machine (5,949 kg vs 8,460 kg), which helps on soft ground and transport, while the heavier model carries more ballast for traction-limited draft work. International Harvester 1086B is the newer design (1981 vs 1963). In short: choose the International Harvester 1086B for outright pulling power, or the International Harvester 806 if a tighter budget and lighter footprint matter more. Compare the full spec tables below before booking a demo.

Tune the fit score
Tell us about your operation
Fit & specs
International Harvester 1086B Tractor
International Harvester
85
Fit score
Best match
Clear
International Harvester 806 Tractor
International Harvester
85
Fit score
Best match
Clear
Rated power
98 hp
95 hp
Confidence
40%
40%
Guide price
Overview
Manufacturer
International HarvesterReference
International HarvesterReference
liquid-cooled inlineReference
As two-range Torque Amplifer (TA) to the basic transmission. Pulling back on the left-hand TA lever provides a clutchless shift to a lower speed for each gear. Pushing the lever forward return to direct-drive mode.Reference
Total built
164Reference
8,052Reference
Differential lock
electro-hydraulic rearReference
Original price
$6,800 (1967)Reference
Drive
4x4 MFWD 4WD (optional)Reference
Steering
hydrostatic powerReference
Engine
Engine
110.4 kWReference
Displacement
6.8 LReference
4.9 LReference
Bore/Stroke
109 x 121 mmReference
97 x 112 mmReference
Power
110.4 kWReference
Air cleaner
dryReference
dual dryReference
Rated RPM
2400Reference
2400Reference
Starter type
electricReference
Drawbar (claimed)
64.6 kWReference
Idle RPM
900-2400Reference
Starter volts
12Reference
Coolant capacity
22.7 LReference
Compression
8.71:1Reference
Transmission
Transmission
two-speed power shiftReference
Torque AmplifierReference
Gears
16 forward and 4 reverseReference
16 forward and 8 reverseReference
Clutch
hydraulic cerametallic discReference
PTO & Hydraulics
PTO (claimed)
73.1 kWReference
70.8 kWReference
Type
Torque AmplifierReference
partial power shiftReference
Rear Type
III/IIReference
IIReference
Rear PTO
independentReference
independentReference
Rear PTO Type
540/1000 (1.375)Reference
540/1000Reference
Engine RPM
1000@2100Reference
Hydraulic system
64.3 LReference
Capacity
64.3 LReference
Pump flow
11.4 lpmReference
Total flow
90.8 lpmReference
Steering flow
34.1 lpmReference
Dimensions
Weight
5949 kgReference
8460 to 9220 poundsReference
Front tire
11.00-16Reference
7.50-20Reference
Rear tire
24.5-32Reference
18.4-34Reference
Ag front
11.00-16Reference
7.50-20Reference
Ag rear
24.5-32Reference
23.1-34Reference
Length
426 cmReference
388 cmReference
Width
259 cmReference
269 cmReference
Shipping weight
5949 kgReference
4182 kgReference
Ground clearance
39 cmReference
Wheelbase
231 cmReference
Height (steering wheel)
208 cmReference
Bar rear axle
82 mmReference
Front tread
142/175/203 cmReference
Rear tread
152 to 213 cmReference
Variants
IH 806
standard-treadReference
Farmall 806
row-cropReference
Capacities
Fuel
181.7 LReference
806 Serial Numbers
1963
501Reference
1964
1403Reference
1965
3758Reference
1966
5917Reference
1967
7409Reference
Electrical
Ground
negativeReference
Charging system
generatorReference
Charging amps
25Reference
Batteries
1 (gas/LP)Reference
Battery volts
12 (gas/LP)Reference
Battery AH
60 (gas/LP)Reference
Speeds

Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.

Comparing 0
Compare (pick 2+)