Compare/International Harvester 1246 vs International Harvester 1256
Search

International Harvester 1246 vs International Harvester 1256

Verdict: International Harvester 1246 vs International Harvester 1256

The International Harvester 1246 and the International Harvester 1256 are both tractors — here is how they stack up on the figures that matter. International Harvester 1246 leads on rated power with 122 hp against 116 hp. International Harvester 1246 is the lighter machine (9,481 kg vs 9,940 kg), which helps on soft ground and transport, while the heavier model carries more ballast for traction-limited draft work. International Harvester 1256 holds more fuel (159.0 L vs 110.1 L) for longer stints between fills. International Harvester 1246 is the newer design (1972 vs 1967). In short: choose the International Harvester 1246 for outright pulling power, or the International Harvester 1256 if a tighter budget and lighter footprint matter more. Compare the full spec tables below before booking a demo.

Tune the fit score
Tell us about your operation
Fit & specs
International Harvester 1246 Tractor
International Harvester
85
Fit score
Best match
Clear
International Harvester 1256 Tractor
International Harvester
85
Fit score
Best match
Clear
Rated power
122 hp
116 hp
Confidence
40%
40%
Guide price
Overview
Manufacturer
International HarvesterReference
International HarvesterReference
liquid-cooledReference
Four gears (1-4) in two ranges (low/high) plus reverse range. The Torque Amplifier (TA) allows a clutchless shift from direct drive (DD) to the lower TA speed in all gears and ranges.Reference
Engine
Fuel tank
110.1 LReference
159.0 LReference
Engine
91.0 kWReference
Displacement
5.9 LReference
6.7 LReference
Bore/Stroke
98 x 129 mmReference
110 x 117 mmReference
Power
91.0 kWReference
Rated RPM
2200Reference
2400Reference
Drawbar (tested)
76.1 kWReference
Air cleaner
dual dry elementsReference
Compression
17:1Reference
Starter volts
12Reference
Oil capacity
64.4 LReference
Coolant capacity
22.7 LReference
Power at rated engine speed
86.6 kWReference
Max power
76.1 kWReference
Transmission
Gears
16 forward and 7 reverseReference
16 forward and 8 reverseReference
Transmission
Torque AmplifierReference
PTO & Hydraulics
Pump flow
40.1 lpmReference
30.3 lpmReference
Rear lift
3700 kgReference
Rear PTO Type
540, 1000Reference
1000Reference
PTO (claimed)
84.3 kWReference
PTO (tested)
86.6 kWReference
Type
partial power shiftReference
Valves
1Reference
Rear Type
III/IIReference
Rear PTO
independentReference
Engine RPM
1000@2100Reference
Power at rated PTO speed
84.5 kWReference
Dimensions
Wheelbase
256 cmReference
233 cmReference
Weight
9481 to 10694 poundsReference
9940 to 11030 poundsReference
Front tire
11.00-16Reference
10.00-16Reference
Rear tire
18.4-38Reference
18.4-38 (Farmall)Reference
Ag front
11.2-28 (MFWD)Reference
Ag rear
18.4-38Reference
Length
419 cmReference
416 cmReference
Height
272 cmReference
2WD Weight
4300 kgReference
4WD Weight
4850 kgReference
Standard tires (ag)
Front: 11.00-16. Rear: 24.5-32 (International)Reference
Width
233 cmReference
Height (steering wheel)
218 cmReference
Bar rear axle
82 mmReference
Shipping
5003 kgReference
Operating
4719 kgReference
Ballasted
6264 kgReference
Variants
Farmall 1256
row-cropReference
IH 1256
standardReference
1256 Serial Numbers
1967
7501 (IH)Reference
1968
7703 (IH)Reference
1969
8444 (IH)Reference
Location:
Serial number place on the left side of the 1256, on the clutch housing.Reference
Electrical
Charging system
alternatorReference
Charging amps
55Reference
Batteries
2Reference
Battery volts
6Reference
Battery AH
204Reference
Test results
Fuel use
28.8 l/hourReference
Max pull
5036 kgReference
Speeds

Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.

Comparing 0
Compare (pick 2+)