Compare/J.I. Case 405 vs J.I. Case 640
Search

J.I. Case 405 vs J.I. Case 640

Verdict: J.I. Case 405 vs J.I. Case 640

The J.I. Case 405 and the J.I. Case 640 are both tractors — here is how they stack up on the figures that matter. Both are rated at the same 50 hp. J.I. Case 640 is the newer design (1960 vs 1955). Use the full side-by-side spec tables below to weigh the details against your own operation, and confirm with a dealer demo.

Tune the fit score
Tell us about your operation
Fit & specs
J.I. Case 405 Tractor
J.I. Case
62
Fit score
Best match
Clear
J.I. Case 640 Tractor
J.I. Case
62
Fit score
Best match
Clear
Rated power
50 hp
50 hp
Confidence
40%
40%
Guide price
Overview
Manufacturer
J.I. CaseReference
J.I. CaseReference
Four gears plus reverse, with high and low ranges. All gears and ranges selected by a single lever. A "belt-neutral" position lies between the high and low ranges, intended for stationary work.Reference
Tractors equipped with the Case-o-Matic were sometimes referred to as the 630C.Reference
Total built
50Reference
Original price
$4,800 (1958)Reference
$3,900Reference
Steering
power optionalReference
power assistReference
Factories
Racine, Wisconsin, USAReference
Variants
400
diesel standardReference
401
diesel row-cropReference
402
diesel vineyardReference
403
diesel high-cropReference
405
diesel orchardReference
415
gasoline orchardReference
420
diesel industrialReference
630
diesel standardReference
631
diesel row-cropReference
640
gas standardReference
641
gas row-cropReference
Engine
Belt (claimed)
37.3 kWReference
38.8 kWReference
Plows
4 (14-inch)Reference
Displacement
4.1 LReference
3.1 LReference
Bore/Stroke
102 x 127 mmReference
97 x 105 mmReference
Air cleaner
oil bathReference
oil bathReference
Pre-heating
ether capsulesReference
Compression
15:1Reference
7.34:1Reference
Rated RPM
1500Reference
2250Reference
Idle RPM
600-1600Reference
Firing order
1-3-4-2Reference
Starter volts
12Reference
12Reference
Coolant capacity
28.0 LReference
Intake valve clearance
0.305 mmReference
Exhaust valve clearance
0.305 mmReference
Oil capacity
56.8 LReference
Oil change
120 hReference
Fuel tank
83.3 LReference
Drawbar (tested)
32.3 kWReference
Power at rated engine speed
37.7 kWReference
Max power
31.3 kWReference
Transmission
Transmission
Powr-rangeReference
Case Dual-RangeReference
Gears
8 forward and 2 reverseReference
4 forward and 1 reverseReference
Oil type
SAE 90Reference
Clutch
dry discReference
Capacities
Fuel
79.5 LReference
Diameter
26 cmReference
23 cmReference
Width
18 cmReference
15 cmReference
RPM
1128Reference
Speed
945.18 meters/minReference
PTO & Hydraulics
Hydraulic system
9.8 LReference
Capacity
9.8 LReference
Pressure
41.4 barReference
Valves
2 (optional)Reference
Total flow
45.4 lpmReference
Type
Case Eagle HitchReference
gearReference
Rear PTO
independentReference
independent (Case-o-matic)Reference
Rear PTO Type
540 (1.375)Reference
540/1000 (1.375)Reference
PTO (tested)
37.7 kWReference
Power at rated PTO speed
37.1 kWReference
Electrical
Ground
negativeReference
Charging system
generatorReference
Charging volts
12Reference
Batteries
2Reference
Battery volts
6Reference
Battery AH
150Reference
Dimensions
Weight
2041 kgReference
Front tire
7.50-16Reference
Rear tire
16.9-28Reference
Ag front
7.50-16Reference
Ag rear
16.9-28Reference
Front tread
132 cmReference
Rear tread
121 to 193 cmReference
640 Serial Number Location
Test results
Fuel use
15.1 l/hourReference
Max pull
3117 kgReference

Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.

Comparing 0
Compare (pick 2+)