Compare/J.I. Case 843 vs J.I. Case 995
Search

J.I. Case 843 vs J.I. Case 995

Verdict: J.I. Case 843 vs J.I. Case 995

The J.I. Case 843 and the J.I. Case 995 are both tractors — here is how they stack up on the figures that matter. J.I. Case 843 leads on rated power with 66 hp against 62 hp. J.I. Case 843 holds more fuel (83.3 L vs 60.6 L) for longer stints between fills. J.I. Case 995 is the newer design (1976 vs 1960). In short: choose the J.I. Case 843 for outright pulling power, or the J.I. Case 995 if a tighter budget and lighter footprint matter more. Compare the full spec tables below before booking a demo.

Tune the fit score
Tell us about your operation
Fit & specs
J.I. Case 843 Tractor
J.I. Case
62
Fit score
Best match
Clear
J.I. Case 995 Tractor
J.I. Case
62
Fit score
Best match
Clear
Rated power
66 hp
62 hp
Confidence
40%
40%
Guide price
Overview
Manufacturer
J.I. CaseReference
J.I. CaseReference
LP gasReference
Three gears, plus reverse, in four ranges. Synchronized up-shifts from 1-to-2 and 2-to-3. Synchronized down-shift from 3-to-2.Reference
Final drives
spur gearReference
Variants
830
diesel standard-frontReference
831
diesel row-cropReference
832
diesel Western SpecialReference
833
diesel high-cropReference
840
gas standard-frontReference
841
gas row-cropReference
842
gas Western SpecialReference
843
gas high-cropReference
Engine
Fuel tank
106.0 LReference
60.6 LReference
Belt (claimed)
49.2 kWReference
Plows
5Reference
Displacement
4.7 LReference
3.6 LReference
Bore/Stroke
108 x 127 mmReference
100 x 114 mmReference
Air cleaner
oil bathReference
Compression
8.2:1Reference
17:1Reference
Rated RPM
1900 (Case-O-Matic)Reference
2200Reference
Engine (gross)
46.2 kWReference
Drawbar (tested)
36.3 kWReference
Power (gross)
46.2 kWReference
Operating RPM
700-2200Reference
Coolant capacity
13.2 LReference
Power at rated engine speed
43.8 kWReference
Max power
36.3 kWReference
Transmission
Transmission
Case-O-MaticReference
Gears
8 forward and 2 reverseReference
12 forward and 4 reverseReference
Clutch
wet discReference
250mm dry discReference
PTO & Hydraulics
Type
torque converterReference
synchromeshReference
Rear Type
IIReference
II/IReference
Control
Draft-o-matic load/depth controlReference
Rear PTO
independentReference
liveReference
Rear PTO Type
540/1000 (1.375)Reference
540/1000Reference
PTO (claimed)
43.3 kWReference
PTO (tested)
43.8 kWReference
Pump flow
28.0 lpmReference
Rear lift
907 kgReference
Engine RPM
1000@2000Reference
Power at rated PTO speed
41.3 kWReference
Capacities
Diameter
26 cmReference
Width
18 cmReference
170 cmReference
RPM
1261 (Case-O-Matic 1000)Reference
Dimensions
Ground clearance
85 cmReference
Front tread
138 to 201 cmReference
Rear tread
152 to 238 cmReference
132 to 193 cmReference
Wheelbase
208 cmReference
Weight
4780 to 5190 poundsReference
Front tire
7.50-16Reference
Rear tire
13.6/12-36Reference
Ag front
6.00-19Reference
Ag rear
16.4/14-30Reference
Length
320 cmReference
Height (hood)
148 cmReference
Height (cab)
241 cmReference
Clearance (front axle)
53 cmReference
Clearance (drawbar)
40 cmReference
Cab Operating
2354 kgReference
Ballasted
4297 kgReference
995 Serial Numbers
1971
920001Reference
1972
921383Reference
1973
925158Reference
1974
928575Reference
1975
931772Reference
1976
11070001Reference
1977
11080236Reference
1978
11089141Reference
1979
11096828Reference
1980
11104577Reference
Location:
On front frame, right side.Reference
Electrical
Charging system
alternatorReference
Battery volts
12Reference
Battery AH
96Reference
Test results
Fuel use
13.2 l/hourReference
Max pull
3318 kgReference

Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.

Comparing 0
Compare (pick 2+)