Compare/John Deere 3043D vs John Deere 5041C
Search

John Deere 3043D vs John Deere 5041C

Verdict: John Deere 3043D vs John Deere 5041C

The John Deere 3043D and the John Deere 5041C are both tractors — here is how they stack up on the figures that matter. John Deere 3043D leads on rated power with 42 hp against 41 hp. John Deere 3043D is the lighter machine (1,288 kg vs 1,730 kg), which helps on soft ground and transport, while the heavier model carries more ballast for traction-limited draft work. John Deere 5041C holds more fuel (45.0 L vs 36.7 L) for longer stints between fills. John Deere 3043D is the newer design (2019 vs 2011). In short: choose the John Deere 3043D for outright pulling power, or the John Deere 5041C if a tighter budget and lighter footprint matter more. Compare the full spec tables below before booking a demo.

Tune the fit score
Tell us about your operation
Fit & specs
John Deere 3043D Tractor
John Deere
71
Fit score
Best match
Clear
John Deere 5041C Tractor
John Deere
71
Fit score
Best match
Clear
Rated power
42 hp
41 hp
Confidence
98%
98%
Guide price
Overview
Manufacturer
John DeereReference
John DeereReference
With 15x19.5 rear tires. Reverse speeds are 5% faster than forward.Reference
With 13.6x28 rear tires.Reference
Final drives
spur gearReference
Steering
powerReference
Engine
Fuel tank
36.7 LReference
45.0 LReference
Engine (gross)
31.0 kWReference
Displacement
1.6 LReference
2.9 LReference
Bore/Stroke
86 x 90 mmReference
106 x 110 mmReference
Emissions
Tier 4Reference
Power (gross)
31.0 kWReference
Fuel system
high pressure common rail direct injectionReference
Air cleaner
dual dry elementReference
Compression
19.1:1Reference
17.8:1Reference
Rated RPM
2400Reference
2100Reference
Starter
electricReference
Starter volts
12Reference
12Reference
Starter power
1.4 kWReference
2.5 kWReference
Oil capacity
32.9 LReference
Oil change
400 hReference
Coolant capacity
5.5 LReference
Fuel Type
DieselReference
No of Cylinders
ThreeReference
Rated engine speed
2,800 rpmReference
Emissions compliance
Final Tier 4Reference
Cylinder liners
Cast-in-blockReference
Engine torque at rated speed
105.7 NmReference
Injection pump type
High pressure common rail direct injectionReference
Aspiration
TurbochargedReference
Bore and stroke
86 x 90 mmReference
Compression ratio
19.1:1Reference
Cooling system
LiquidReference
Engine
30.6 kWReference
Power
30.6 kWReference
Firing order
1-2-3Reference
Transmission
Gears
8 forward and reverseReference
8 forward and 2 reverseReference
Clutch
dry discReference
Transmission Type
Sync ShuttleReference
Wheel Drive
4WDReference
Gear Shift Location
Right-hand sideReference
PTO & Hydraulics
PTO (claimed)
27.1 kWReference
Type
mechanical shuttleReference
collar shift gearReference
Pressure
172.4 barReference
Rear valves
2Reference
Pump flow
19.3 lpmReference
20.1 lpmReference
Total flow
39.0 lpmReference
Steering flow
16.7 lpmReference
17.8 lpmReference
Rear Type
IReference
IIReference
Control
position controlReference
position and draft controlReference
Rear lift (at 24"/610mm)
757 kgReference
Rear PTO
transmissionReference
independentReference
Rear PTO Type
540 (1.375)Reference
540 (1.375)Reference
Engine RPM
540@2400Reference
540@1575Reference
Rear lift (at ends)
1000 kgReference
Dimensions
Wheelbase
157 cmReference
186 cmReference
Weight
1288 kgReference
1730 kgReference
Front tire
7-14Reference
6.0x16Reference
Rear tire
11.2-24Reference
12.4x28Reference
Standard tires (ag)
Front: 7-14. Rear: 11.2-24Reference
Lawn/turf front
27x8.5-15Reference
Lawn/turf rear
41x14-20Reference
Industrial front
25x8.5-14Reference
Industrial rear
15-19.5Reference
Length
282 cmReference
292 cmReference
Width
145 cmReference
173 cmReference
Height (steering wheel)
150 cmReference
Clearance (front axle)
35 cmReference
Clearance (rear axle)
33 cmReference
Front tread
105 cmReference
Rear tread
109 cmReference
Shipping
1288 kgReference
Max front axle
879 kgReference
Max rear axle
1599 kgReference
Ag front
6.0x16Reference
Ag rear
13.6x28Reference
Ground clearance
37 cmReference
John Deere 3043D attachments
3043D Serial Numbers
Location:
Serial number plate on the left side of the tractor frame, above the front axle.Reference
Electrical
Ground
negativeReference
negativeReference
Charging system
alternatorReference
alternatorReference
Charging amps
55Reference
40Reference
Battery CCA
600Reference
Battery volts
12Reference
12Reference
Battery size
600 CCAReference
Alternator size
55 ampReference
Battery AH
88Reference
Capacities
Max capacity
2100 kgReference
Front Axle capacity
880 kgReference
Rear Axle capacity
1,599.8 kgReference
Crankcase oil volume
4.5 LReference
Speeds
General
Make & Model
Yanmar® @ 3TNV86CT-KJPTReference
Lubrication
PressurizedReference
Cruise control
falseReference
Differential lock
YesReference
Rollover protective structure
Type\\nFoldable\\nASABE S478Reference
Platform
StraddleReference
Power
Max Power
41.6 hp (2,800 rpm)Reference
PTO
PTO Power
36.3 hpReference
Rear PTO Power
AvailableReference
Rear PTO Control
MechanicalReference
Rear PTO RPM
540 rpmReference
Steering & brakes
Brakes
Wet diskReference
Steering type
Power steeringReference
Hydraulics
Pump Rated Output (total)
39.2 l/minReference
Hydraulics Type
Single gearReference
Maximum operating pressure
2,495 psiReference
Remote Valves
twoReference
Steering & Implements flow
16.8 L/min (22.4 L/min)Reference
Rear Hitch category (SAE designation)
3-Point | Category 1Reference
Dimensions & weight
Ground Clearance
Minimum: 331 mmReference
Turning radius
1.6 mReference
Overall weight
1,288.2 kgReference
Wheels & tyres
Front Wheel Type
R1 Bar: 7-14\\nR3 Turf: 27x8.5-15\\nR4 Industrial: 25x8.5-14Reference
Operator station
Cab Availability
falseReference

Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.

Comparing 0
Compare (pick 2+)