Search
John Deere 7530 Premium vs John Deere 8200T
Verdict: John Deere 7530 Premium vs John Deere 8200T
The John Deere 7530 Premium and the John Deere 8200T are both tractors — here is how they stack up on the figures that matter. John Deere 8200T leads on rated power with 182 hp against 180 hp. John Deere 7530 Premium is the lighter machine (6,622 kg vs 23,650 kg), which helps on soft ground and transport, while the heavier model carries more ballast for traction-limited draft work. John Deere 7530 Premium is the newer design (2007 vs 1997). In short: choose the John Deere 8200T for outright pulling power, or the John Deere 7530 Premium if a tighter budget and lighter footprint matter more. Compare the full spec tables below before booking a demo.
Tune the fit score
Tell us about your operation
Fit & specs
John Deere
94
Fit score
Best match
Clear
John Deere
94
Fit score
Best match
Clear
Rated power
180 hp
182 hp
Confidence
98%
98%
Guide price
—
—
Overview
Manufacturer
John DeereReference
John DeereReference
The IVT is operated with a right-hand speed control lever and left-hand reverser lever. The speed control lever is used to select speed in one of two ranges. A dial on the lever sets the maximum speed for the range. If a maximum speed of 2 kph or less is selected then the transmission will shift into creeper mode with a minimum speed of 0.05 kph.Reference
Gear 3 used for pull test.Reference
Factories
Mannheim, Baden-Württemberg, GermanyReference
—
Original price
$135,731 (2010)Reference
—
Steering
hydrostatic powerReference
hydrostatic powerReference
Drive
—
crawlerReference
Engine
Fuel tank
350.1 LReference
—
Engine (gross)
134.2 kWReference
—
Drawbar (tested)
106.5 kWReference
115.6 kWReference
Displacement
6.8 LReference
8.1 LReference
Bore/Stroke
106 x 127 mmReference
116 x 129 mmReference
Rated Power (gross)
134.2 kWReference
—
Air cleaner
dual paper elementsReference
two paper elementsReference
Compression
17.0:1Reference
16.5:1Reference
Rated RPM
2100Reference
2200Reference
Idle RPM
850-2250Reference
—
Operating RPM
1300-2100Reference
—
Torque
870.6 NmReference
—
Torque RPM
1600Reference
—
Firing order
1-5-3-6-2-4Reference
—
Starter volts
12Reference
12Reference
Starter power
3.0 kWReference
—
Oil capacity
56.0 LReference
246.1 LReference
Coolant capacity
35.6 LReference
34.0 LReference
Intake valve clearance
0.356 mmReference
—
Exhaust valve clearance
0.457 mmReference
—
Max power
106.5 kWReference
115.6 kWReference
Power at rated engine speed
117.5 kWReference
135.7 kWReference
Fuel Type
DieselReference
—
No of Cylinders
6 cylinderReference
—
Rated engine speed
2,100 RPMReference
—
Engine torque at rated speed
291.2 kgReference
—
Bore and stroke
4.19x5.00 inchesReference
—
Compression ratio
17.0:1Reference
—
Cooling system
liquid-cooledReference
—
Transmission
Transmission
John Deere IVTReference
—
Gears
infinite forward and reverseReference
16 forward and 4 reverseReference
Transmission Type
PowershiftReference
—
Wheel Drive
4WDReference
—
PTO & Hydraulics
PTO (claimed)
114.1 kWReference
134.2 kWReference
PTO (tested)
131.1 kWReference
150.4 kWReference
Type
infinitely variable transmissionReference
full powershiftReference
Pressure
216.2 barReference
200.0 barReference
Valves
2 to 4Reference
3 to 5Reference
Pump flow
109.8 lpmReference
143.8 lpmReference
Rear Type
IIIReference
III/IIINReference
Rear lift (at 24"/610mm)
4808 kgReference
—
Rear PTO
independentReference
independentReference
Rear PTO Type
540E/1000/1000E (optional)Reference
1000Reference
Front PTO
independentReference
—
Front PTO Type
1000 (optional)Reference
—
Power at rated PTO speed
130.2 kWReference
—
Hydraulic system
—
246.0 LReference
Rear lift
—
7098 kgReference
Dimensions
Wheelbase
268 cmReference
226 cmReference
Weight
6622 kgReference
23650 to 24430 poundsReference
Front tire
16.9R28Reference
—
Rear tire
18.4R42Reference
—
Ag front
16.9R28Reference
—
Ag rear
18.4R42Reference
—
Length
479 cmReference
557 cmReference
Height (cab)
304 cmReference
312 cmReference
Clearance (front axle)
57 cmReference
—
Clearance (rear axle)
63 cmReference
—
Clearance (drawbar)
53 cmReference
—
Rear axle
91 by 2806 mmReference
—
Front tread
152 to 223 cmReference
—
Rear tread
152 to 302 cmReference
—
Shipping
6622 kgReference
10727 kgReference
Max Drawbar
2449 kgReference
—
Max front axle
7098 kgReference
—
Max rear axle
9498 kgReference
—
Ground clearance
—
55 cmReference
Operating
—
11081 kgReference
Ballasted
—
11607 kgReference
Electrical
Ground
negativeReference
negativeReference
Charging system
alternatorReference
alternatorReference
Battery volts
12Reference
12Reference
Charging amps
—
140Reference
Batteries
—
2Reference
Capacities
Max capacity
12299 kgReference
—
Capacity
414.4 ciReference
246.0 LReference
Crankcase oil volume
20.8 qtsReference
—
Fuel
—
492.1 LReference
Test results
Fuel use
34.8 l/hourReference
39.7 l/hourReference
Max pull
6955 kgReference
11154 kgReference
Speeds
General
Make & Model
John DeereReference
—
SCV control
JOYSTICKReference
—
Country of manufacturer
GermanyReference
—
Hydraulics
Capacity Valves
24 valvesReference
—
Hydraulics Type
closed center, pressure and flow compensatedReference
—
Maximum operating pressure
3,135 psiReference
—
Remote Valves
2 to 4 ValvesReference
—
Rear Hitch category (SAE designation)
Category IIIReference
—
PTO
PTO Power
153 hpReference
—
Rear PTO Power
AvailableReference
—
Rear PTO RPM
1,000 RPMReference
—
Front PTO Power
AvailableReference
—
Steering & brakes
Brakes
Differential hydraulic wet discReference
—
Steering type
Hydrostatic PowerReference
—
Dimensions & weight
Height Over Cab
304.5 cmReference
—
Overall Length
479.8 cmReference
—
Drawbar clearance
53.8 cmReference
—
Front axle clearance
57.7 cmReference
—
Overall weight
6,622.4 kgReference
—
Wheels & tyres
Rear Wheel Type
18.4R42Reference
—
Rear wheel tread range
60 to 119.2 (long axle) inchesReference
—
Front Wheel Type
16.9R28Reference
—
Front Wheel tread range
60 to 88 inchesReference
—
Operator station
Cab Availability
ComfordGard cab standard.Reference
—
Seat Suspension
TRUEReference
—
Variants
8200
—
wheeled tractorReference
8200T
—
crawler tractorReference
8200T Serial Numbers
1997
—
901001Reference
1998
—
902001Reference
1999
—
904001Reference
Location:
—
Rear of tractorReference
John Deere 8200T Tracks
Width
—
263 cmReference
Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.