Compare/New Holland 5610S vs New Holland L75
Search

New Holland 5610S vs New Holland L75

Verdict: New Holland 5610S vs New Holland L75

The New Holland 5610S and the New Holland L75 are both tractors — here is how they stack up on the figures that matter. Both are rated at the same 66 hp. New Holland 5610S is the lighter machine (2,566 kg vs 6,393 kg), which helps on soft ground and transport, while the heavier model carries more ballast for traction-limited draft work. New Holland L75 is the newer design (1996 vs 1994). Use the full side-by-side spec tables below to weigh the details against your own operation, and confirm with a dealer demo.

Tune the fit score
Tell us about your operation
Fit & specs
New Holland 5610S Tractor
New Holland
62
Fit score
Best match
Clear
New Holland L75 Tractor
New Holland
62
Fit score
Best match
Clear
Rated power
66 hp
66 hp
Confidence
40%
40%
Guide price
Overview
Manufacturer
New HollandReference
New HollandReference
Four gears, plus reverse, in two ranges. Tractor must be stopped, and clutch used, before shifting gear or range.Reference
Four gears in three ranges with two-speed power shift and left-hand reverser. The Dual Command provides push-button shifting to lower gear at each speed.Reference
Steering
2.2 LReference
Engine
Engine
55.9 kWReference
55.9 kWReference
Displacement
4.4 LReference
3.9 LReference
Bore/Stroke
112 x 112 mmReference
104 x 115 mmReference
Power
55.9 kWReference
55.9 kWReference
Pre-heating
block heater (optional)Reference
ThermostartReference
Compression
17.5:1Reference
Rated RPM
2200Reference
2500Reference
Firing order
1-3-4-2Reference
Starter volts
12Reference
12Reference
Oil capacity
11.4 LReference
11.7 LReference
Coolant capacity
13.0 LReference
16.0 LReference
Intake valve clearance
0.406 mmReference
Exhaust valve clearance
0.483 mmReference
Fuel tank
109.8 LReference
Transmission
Gears
8 forward and 2 reverseReference
24 forward and 12 reverseReference
Transmission
Dual CommandReference
PTO & Hydraulics
PTO (claimed)
49.2 kWReference
49.2 kWReference
Type
unsynchronized gearReference
partial power shiftReference
Pressure
172.4 barReference
Valves
2Reference
2 to 3Reference
Pump flow
36.7 lpmReference
54.9 lpmReference
Steering flow
36.3 lpmReference
Steering cap.
2.2 LReference
Rear Type
IIReference
IIReference
Control
position control with top-link draft sensingReference
mechanical, lower linkReference
Rear lift
1832 kgReference
Rear PTO
independentReference
independentReference
Rear PTO Type
540Reference
540Reference
Engine RPM
540@1900Reference
Rear lift (at 24"/610mm)
2875 kgReference
Clutch
electro-hydraulic wet discReference
Capacities
Fuel
50.0 LReference
Dimensions
Wheelbase
222 cmReference
Weight
2566 kgReference
6393 to 7496 poundsReference
Front tire
7.50-16Reference
7.50-16Reference
Rear tire
16.9-30Reference
16.9-30Reference
Ag front
7.50-16Reference
7.50-16Reference
Ag rear
16.9-30Reference
16.9-30Reference
Length
368 cmReference
Height (ROPS)
243 cmReference
Ground clearance
46 cmReference
2WD Wheelbase
234 cmReference
4WD Wheelbase
231 cmReference
Width
184 cmReference
Front tread
142 to 213 cmReference
Rear tread
152 to 213 cmReference
2WD ROPS Shipping
2899 kgReference
2WD Cab Shipping
3099 kgReference
4WD ROPS Shipping
3200 kgReference
4WD Cab Shipping
3400 kgReference
Electrical
Ground
negativeReference
negativeReference
Charging system
alternatorReference
alternatorReference
Charging amps
55Reference
Charging volts
12Reference
Battery volts
12Reference
12Reference
ROPS Charging amps
45Reference
Cab Charging amps
65Reference
New Holland L75 Height
ROPS
213 cmReference
Cab
247 cmReference

Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.

Comparing 0
Compare (pick 2+)