Search
New Holland 7740 vs New Holland 8260
Verdict: New Holland 7740 vs New Holland 8260
The New Holland 7740 and the New Holland 8260 are both tractors — here is how they stack up on the figures that matter. Both are rated at the same 100 hp. New Holland 7740 is the lighter machine (7,312 kg vs 11,616 kg), which helps on soft ground and transport, while the heavier model carries more ballast for traction-limited draft work. Use the full side-by-side spec tables below to weigh the details against your own operation, and confirm with a dealer demo.
Tune the fit score
Tell us about your operation
Fit & specs
New Holland
85
Fit score
Best match
Clear
New Holland
85
Fit score
Best match
Clear
Rated power
100 hp
100 hp
Confidence
40%
40%
Guide price
—
—
Overview
Manufacturer
New HollandReference
New HollandReference
Four power shift gears arranged in two synchronized ratio groups (1-4 and 5-8). Two synchronized ranges (low/high) and right-hand shuttle. Clutch must be used to shift range or move between the lower (1-4) and higher (5-8) gear ratio groups. Push-button power shifting between the four gears in a ratio group. Push-button de-clutching on the shuttle lever allow shifting without the foot clutch. The 16 power shift was standard on the 7740 SLE.Reference
The 18-speed Range Command transmission was available with 4WD. Six gears (1-6) in three ranges (A-C) with left-hand shuttle lever. Push-button gear shifting on the move. To shift ranges, hold up or down gear shift button while pressing range shift button. Reverse is available in range B only. Optional creeper increases available speeds to 31 and 12.Reference
Original price
$36,000 (1998)Reference
$48,000 (1999)Reference
Drive
4x4 MFWD 4WD (optional)Reference
4x4 MFWD 4WD (optional)Reference
Final drives
inboard planetaryReference
—
Differential lock
electro-hydraulic (SL/SLE)Reference
Rear or front and rear (4WD) with push-button operation. Manual and automatic modes. (2WD)Reference
Brakes
hydraulic wet disc (SL/SLE)Reference
—
Steering
—
hydrostatic powerReference
Engine
Fuel tank
177.5 LReference
—
Engine (gross)
74.8 kWReference
—
Engine (net)
70.8 kWReference
—
Drawbar (tested)
57.4 kWReference
65.6 kWReference
Displacement
5.0 LReference
7.5 LReference
Bore/Stroke
112 x 127 mmReference
114 x 127 mmReference
Power (net)
70.8 kWReference
—
Power (gross)
74.8 kWReference
—
Air cleaner
dual paper elementsReference
—
Compression
17.5:1Reference
17.5:1Reference
Rated RPM
2100Reference
2200Reference
Idle RPM
725-2275Reference
700-2420Reference
Torque
560.0 NmReference
—
Torque RPM
1200Reference
1600Reference
Firing order
1-3-4-2Reference
1-5-3-6-2-4Reference
Starter volts
12Reference
12Reference
ROPS Coolant capacity
14.5 LReference
—
Cab Coolant capacity
16.0 LReference
—
Intake valve clearance
0.406 mmReference
0.406 mmReference
Exhaust valve clearance
0.483 mmReference
0.457 mmReference
Oil capacity
60.6 LReference
89.7 LReference
Power at rated engine speed
64.8 kWReference
—
Max power
55.3 kWReference
65.6 kWReference
Operating RPM
—
1500-2200Reference
Starter power
—
3.7 kWReference
Coolant capacity
—
25.5 LReference
Transmission
Transmission
ElectroShift/Pulse CommandReference
Range CommandReference
Gears
16 forward and reverseReference
18 forward and 6 reverseReference
Clutch
dry discReference
wet discReference
PTO & Hydraulics
PTO (claimed)
64.1 kWReference
74.6 kWReference
PTO (tested)
64.8 kWReference
79.8 kWReference
Type
four-speed power shiftReference
partial power shiftReference
Valves
1 to 4Reference
2 to 4Reference
Pump flow
75.7 lpmReference
98.4 lpmReference
Steering press.
144.8 barReference
170.0 barReference
Rear Type
IIReference
IIReference
Control
Position control and top-link draft sensing. Electronic lower-link sensing optional on 7740 SLE.Reference
—
Rear lift (at 24"/610mm)
3950 kgReference
3855 kgReference
Rear PTO
independentReference
independentReference
Rear PTO Type
540/1000Reference
540/1000Reference
Power at rated PTO speed
64.4 kWReference
—
Hydraulic system
—
72.7 LReference
Capacity
—
72.7 LReference
Pressure
—
190.0 barReference
Steering flow
—
59.0 lpmReference
Dimensions
Wheelbase
236 cmReference
272 cmReference
Weight
7312 to 9194 poundsReference
11616 to 12606 poundsReference
Front tire
7.50-16Reference
11.00-16Reference
Rear tire
18.4-30Reference
18.4R38 (2WD)Reference
Ag front
7.50-16Reference
—
Ag rear
18.4-30Reference
—
Length
411 cmReference
462 cmReference
2WD Width
195 cmReference
—
4WD Width
203 cmReference
—
2WD Clearance (front axle)
55 cmReference
—
4WD Clearance (front axle)
50 cmReference
—
2WD ROPS Shipping
3316 kgReference
—
4WD ROPS Shipping
3695 kgReference
—
2WD Cab Shipping
3709 kgReference
—
4WD Cab Shipping
4170 kgReference
—
Operating
3937 kgReference
—
Ballasted
5198 kgReference
—
Standard tires (ag)
—
Front: 14.9R28. Rear: 18.4R38 (4WD)Reference
Width
—
213 cmReference
Clearance (front axle)
—
48 cmReference
Clearance (drawbar)
—
38 cmReference
Front tread
—
155 to 211 cmReference
Rear tread
—
151 to 230 cmReference
Shipping
—
5718 kgReference
Max front axle
—
3499 kgReference
Max rear axle
—
6500 kgReference
New Holland 7740 attachments
7740 Serial Numbers
1993
BD35935Reference
—
1994
BD65544Reference
—
1995
BD98440Reference
—
1996
019149BReference
—
Location:
Data plate inside hood.Reference
—
Electrical
Ground
negativeReference
negativeReference
Charging system
alternatorReference
alternatorReference
ROPS Charging amps
55Reference
—
Cab Charging amps
100Reference
—
ROPS Batteries
1Reference
—
Cab Batteries
2Reference
—
Battery CCA
800Reference
900Reference
Battery volts
12Reference
12Reference
Charging amps
—
100 (with cab)Reference
Batteries
—
2Reference
Attachment overview
New Holland 7740 Height
Hood
170 cmReference
—
Cab
271 cmReference
283 cmReference
Exhaust
284 cmReference
297 cmReference
Test results
Fuel use
20.1 l/hourReference
—
Max pull
4631 kgReference
—
Speeds
Variants
M115
—
similar Fiat modelReference
Capacities
Fuel
—
321.7 LReference
Front hubs
—
1.7 LReference
Front diff.
—
2.2 LReference
Max capacity
—
8001 kgReference
New Holland 8260 Height
ROPS
—
290 cmReference
Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.

