Search
Oliver 1755 vs Oliver 995
Verdict: Oliver 1755 vs Oliver 995
The Oliver 1755 and the Oliver 995 are both tractors — here is how they stack up on the figures that matter. Oliver 1755 leads on rated power with 87 hp against 85 hp. Oliver 1755 is the lighter machine (4,354 kg vs 5,080 kg), which helps on soft ground and transport, while the heavier model carries more ballast for traction-limited draft work. Oliver 1755 is the newer design (1970 vs 1958). In short: choose the Oliver 1755 for outright pulling power, or the Oliver 995 if a tighter budget and lighter footprint matter more. Compare the full spec tables below before booking a demo.
Tune the fit score
Tell us about your operation
Fit & specs
Oliver
62
Fit score
Best match
Clear
Oliver
62
Fit score
Best match
Clear
Rated power
87 hp
85 hp
Confidence
40%
40%
Guide price
—
—
Overview
Manufacturer
Oliver (a part of White)Reference
OliverReference
The Hydraul-Shift overs a power shift between over-, under-, and direct-drive for each gear.Reference
Gear 1 used for pull test.Reference
Variants
990
—
gear driveReference
995
—
torque converterReference
G850
similar Minneapolis-Moline modelReference
—
Engine
Drawbar (tested)
55.1 kWReference
53.5 kWReference
Displacement
4.6 LReference
3.5 LReference
Bore/Stroke
98 x 102 mmReference
108 x 127 mmReference
Air cleaner
dryReference
—
Compression
8.5:1Reference
17:1Reference
Rated RPM
2400Reference
2000Reference
Starter volts
12Reference
12Reference
Oil capacity
7.6 LReference
—
Coolant capacity
18.9 LReference
—
Power at rated engine speed
64.8 kWReference
—
Max power
55.1 kWReference
53.5 kWReference
Belt (tested)
—
63.7 kWReference
Belt power (max)
—
63.7 kWReference
Transmission
Gears
18 forward and 6 reverseReference
6 forward and 2 reverseReference
Clutch
305mm cerametallic discReference
—
Transmission
Hydraul-ShiftReference
—
PTO & Hydraulics
PTO (claimed)
64.1 kWReference
63.7 kWReference
PTO (tested)
64.8 kWReference
—
Hydraulic system
25.5 LReference
—
Type
partial power shiftReference
torque converterReference
Capacity
25.5 LReference
—
Pressure
151.7 barReference
—
Pump flow
75.7 lpmReference
—
Rear Type
II/IIIReference
—
Rear lift
2721 kgReference
—
Rear PTO
independentReference
independentReference
Rear PTO Type
1000Reference
540Reference
Capacities
Fuel
132.5 LReference
—
Diameter
—
31 cmReference
RPM
—
1135Reference
Speed
—
1110.08 meters/minReference
Dimensions
2WD Wheelbase
261 cmReference
—
4WD Wheelbase
219 cmReference
—
Weight
4354 kgReference
5080 kgReference
Front tire
7.50-15Reference
7.50-18Reference
Rear tire
18.4-34Reference
18-26Reference
2WD Ag front
11.00L-15Reference
—
4WD Ag front
14.9-26Reference
—
Ag rear
12.4-42Reference
15-34Reference
2WD Length
405 cmReference
—
4WD Length
387 cmReference
—
Width
204 cmReference
22 cmReference
Height (steering wheel)
217 cmReference
—
Operating weight
4354 kgReference
5080 kgReference
Ballasted weight
6010 kgReference
7595 kgReference
2WD Ground clearance
64 cmReference
—
4WD Ground clearance
34 cmReference
—
2WD Front tread
156 to 222 cmReference
—
4WD Front tread
152/179/203 cmReference
—
Rear tread
144 to 303 cmReference
167 cmReference
Ag front
—
7.50-18Reference
Length
—
202 cmReference
Front tread
—
152 cmReference
1755 Serial Numbers
1970
221-603Reference
—
1971
226-445Reference
—
1972
231-415Reference
—
1973
238-136Reference
—
1974
245-667Reference
—
1975
257-515Reference
—
Final
260-346Reference
115469Reference
Test results
Fuel use
25.0 l/hourReference
25.7 l/hourReference
Max pull
4785 kgReference
5687 kgReference
Belt fuel use (max)
—
25.7 l/hourReference
Speeds
995 Serial Numbers
1958
—
67828Reference
1959
—
71245Reference
1960
—
84487Reference
1961
—
110064Reference
Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.