Search
Oliver 1870 vs Oliver 1950-T
Verdict: Oliver 1870 vs Oliver 1950-T
The Oliver 1870 and the Oliver 1950-T are both tractors — here is how they stack up on the figures that matter. Oliver 1950-T leads on rated power with 105 hp against 99 hp. Oliver 1870 is the lighter machine (5,397 kg vs 10,460 kg), which helps on soft ground and transport, while the heavier model carries more ballast for traction-limited draft work. Oliver 1870 is the newer design (1973 vs 1967). In short: choose the Oliver 1950-T for outright pulling power, or the Oliver 1870 if a tighter budget and lighter footprint matter more. Compare the full spec tables below before booking a demo.
Tune the fit score
Tell us about your operation
Fit & specs
Oliver
85
Fit score
Best match
Clear
Oliver
85
Fit score
Best match
Clear
Rated power
99 hp
105 hp
Confidence
40%
40%
Guide price
—
—
Overview
Manufacturer
Oliver (a part of White)Reference
OliverReference
Six gears (1-6) with a three-range power shift (under, direct, and over drive).Reference
The Hydraul-Shift provides an on-the-move power shift to a higher or lower range for each of the six forward, and two reverse, gears.Reference
Steering
—
hydraulic powerReference
Engine
Drawbar (claimed)
59.7 kWReference
—
Drawbar (tested)
59.8 kWReference
66.4 kWReference
Displacement
7.0 LReference
5.1 LReference
Bore/Stroke
108 x 127 mmReference
98 x 111 mmReference
Air cleaner
dryReference
dual dry pre-cleanersReference
Compression
9:1Reference
16:1Reference
Rated RPM
1800Reference
2400Reference
Starter
electricReference
—
Starter volts
12Reference
12Reference
Oil capacity
40.7 LReference
10.9 LReference
Coolant capacity
28.4 LReference
18.9 LReference
Power at rated engine speed
73.7 kWReference
78.4 kWReference
Max power
59.8 kWReference
66.4 kWReference
Fuel tank
—
295.2 LReference
Transmission
Gears
18 forward and 6 reverseReference
18 forward and 6 reverseReference
Clutch
355.6mm dry discReference
330mm cera-metallic discReference
Transmission
Hydraul-ShiftReference
Hydraul-ShiftReference
PTO & Hydraulics
Diesel PTO (claimed)
72.3 kWReference
—
LP-gas PTO (claimed)
68.6 kWReference
—
PTO (tested)
73.7 kWReference
78.5 kWReference
Hydraulic system
25.7 LReference
—
Type
three-range power shiftReference
partial power shiftReference
Capacity
25.7 LReference
—
Pressure
151.7 barReference
141.3 barReference
Pump flow
75.7 lpmReference
63.2 lpmReference
Rear Type
IIReference
IIIReference
Rear PTO
independentReference
—
Rear PTO Type
540/1000 (1.375)Reference
540/1000Reference
Power at rated PTO speed
73.7 kWReference
—
PTO (claimed)
—
78.3 kWReference
Control
—
position and lower-link draft controlReference
Rear lift (at ends)
—
2721 kgReference
Capacities
Fuel
147.6 LReference
—
Dimensions
Wheelbase
281 cmReference
277 cmReference
Weight
5397 kgReference
10460 to 11490 poundsReference
Front tire
10.00-16Reference
—
Rear tire
18.4-38Reference
—
Ag front
11.00L-15Reference
—
Ag rear
15.5-38Reference
—
Length
445 cmReference
405 cmReference
Width
243 cmReference
—
Height (steering wheel)
217 cmReference
201 cmReference
Height (hood)
180 cmReference
—
Operating weight
5397 kgReference
—
Clearance (front axle)
54 cmReference
—
Front tread
154 to 215 cmReference
171 to 232 cmReference
Rear tread
144 to 303 cmReference
170 to 276 cmReference
Ground clearance
—
64 cmReference
Operating
—
5211 kgReference
Ballasted
—
9171 kgReference
1870 Serial Numbers
Location:
Serial number plate below the instrument panel, behind the clutch pedal.Reference
—
Electrical
Ground
negativeReference
—
Battery volts
12Reference
—
Test results
Fuel use
26.9 l/hourReference
25.0 l/hourReference
Max pull
3798 kgReference
8025 kgReference
Speeds
Oliver 1950-T attachments
1950-T Serial Number Location
1950-T Serial Numbers
1967
—
188974Reference
1968
—
201931Reference
1969
—
213376Reference
Final
—
218449Reference
Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.