Compare/Ransomes MG5 vs Toro 6-10
Search

Ransomes MG5 vs Toro 6-10

Verdict: Ransomes MG5 vs Toro 6-10

The Ransomes MG5 and the Toro 6-10 are both tractors — here is how they stack up on the figures that matter. Both are rated at the same 6 hp. Ransomes MG5 is the newer design (1948 vs 1920). Use the full side-by-side spec tables below to weigh the details against your own operation, and confirm with a dealer demo.

Tune the fit score
Tell us about your operation
Fit & specs
Ransomes MG5 Tractor
Ransomes
62
Fit score
Best match
Clear
Toro 6-10 Tractor
Toro
62
Fit score
Best match
Clear
Rated power
6 hp
6 hp
Confidence
40%
40%
Guide price
Overview
Manufacturer
RansomesReference
ToroReference
air-cooledReference
Drawbar performanceReference
Drive
crawlerReference
Final drives
spur gearReference
Engine
Engine
4.5 kWReference
Displacement
0.6 LReference
2.3 LReference
Power
4.5 kWReference
Fuel tank
41.6 LReference
Drawbar (claimed)
4.5 kWReference
Belt (claimed)
7.5 kWReference
Plows
1 (14-inch)Reference
Drawbar (tested)
7.4 kWReference
Belt (tested)
9.9 kWReference
Bore/Stroke
79 x 114 mmReference
Rated RPM
1200Reference
Coolant capacity
13.2 LReference
Belt power (max)
9.9 kWReference
Max power
7.4 kWReference
Transmission
Type
gearReference
sliding gearReference
Gears
1 forward and reverseReference
2 forward and 1 reverseReference
Clutch
contracting bandReference
Dimensions
Weight
1043 kgReference
Front tire
26x4Reference
Rear tire
42x6Reference
Ag front
26x4 (steel)Reference
Ag rear
42x6 (steel)Reference
Length
266 cmReference
Width
106 cmReference
Height
129 cmReference
Ground clearance
26 cmReference
Rear tread
81 cmReference
MG5 Serial Numbers
1948
3501Reference
1949
3590Reference
1950
4743Reference
1951
5826Reference
1952
7238Reference
1953
8223Reference
Test results
Belt fuel use (max)
6.4 l/hourReference
Max pull
594 kgReference

Fit score weighs budget, operation size, crop match and data confidence against the details above. It’s guidance, not advice — always confirm with a dealer demo.

Comparing 0
Compare (pick 2+)