Industrial Tractor · 1960Unverified
J.I. Case 530 CK Construction King
J.I. Case 530 CK Construction King — Industrial tractor · 48 hp. Reference specifications; pending source verification.
Provisional listing — the headline figure is shown; full specifications are auto-generated and pending verification against published sources.
Rated power
48 hp
Weight
3280 to 9345 pounds
Hover a source tag to verify
Overview
ManufacturerJ.I. CaseReference
Industrial tractorReference
FactoriesRacine, Wisconsin, USAReference
FactoriesBurlington, Iowa, USAReference
Original priceOpen operator station.Reference
The Case 530 Construction King was based on the Case model 530 tractor. It was available as a bare tractor, loader tractor, or with loader and backhoe. The tractor chassis was built in Racine while the loader and backhoe were built in Burlington.Reference
Two-wheel driveReference
Power steeringReference
Differential manual disc/band brakesReference
Engine
J.I. Case 3.1L 4-cyl dieselReference
J.I. Case 2.6L 4-cyl gasolineReference
Engine35.8 kWReference
J.I. Case G188Reference
dieselReference
4-cylinderReference
liquid-cooledReference
Displacement3.1 LReference
Bore/Stroke97 x 105 mmReference
Power35.8 kWReference
Power38.8 kWReference
Air cleaneroil bathReference
Pre-heatingcoolant heaterReference
Compression17.5:1Reference
Rated RPM1900Reference
Rated RPM2100 (torque converter)Reference
Torque188.5 NmReference
Torque RPM1350Reference
Firing order1-3-4-2Reference
Starter volts12Reference
Coolant capacity15.6 LReference
Coolant change1000 h (annual)Reference
Intake valve clearance0.356 mmReference
Exhaust valve clearance0.356 mmReference
Oil capacity4.7 LReference
Oil change120 h (oil)Reference
Oil change240 h (filter)Reference
J.I. Case G159Reference
gasolineReference
Displacement2.6 LReference
Bore/Stroke89 x 105 mmReference
Power35.5 kWReference
Compression7.42:1Reference
Coolant capacity13.2 LReference
Coolant change1000 h (yearly)Reference
SparkplugPrestolite 18 8Reference
Sparkplug gap0.635 mmReference
Point gap0.508 mmReference
Transmission
8-speed mechanical shuttleReference
12-speedReference
4-speed gearReference
TransmissionDual Range ShuttleReference
Typemechanical shuttleReference
Gears8 forward and reverseReference
Oil capacity14.2 LReference
Four speeds plus reverse with two ranges (low/direct) and a shuttle lever. Torque converter was optional. Torque converter can be locked out by engaging direct-drive mode To engage direct-drive the lever is pushed down. The torque converter will be automatically re-engaged when the clutch is pressed, or can be re-engaged by moving the direct-drive lever up.Reference
TransmissionCase Tripl-RangeReference
Gears12 forward and 3 reverseReference
Oil type[0oC]Reference
32oF [0oC]↑: SAE-90Reference
32oF [0oC]↓: SAE-80Reference
Four speeds, plus reverse, in three ranges (low/direct/high).Reference
TypegearReference
Gears4 forward and 1 reverseReference
Four speeds plus reverse. Torque converter was optional and could be locked out by engaging direct-drive mode.Reference
Capacities
Fuel83.3 LReference
PTO & Hydraulics
Hydraulic system15.1 LReference
Hydraulic system20.8 LReference
Hydraulic system41.6 LReference
TypeoptionalReference
Capacity15.1 LReference
Capacity20.8 LReference
Capacity41.6 LReference
Pressure137.9 barReference
Valves2 (optional)Reference
Total flow83.3 lpmReference
Total flow75.7 lpmReference
Rear TypeI (optional)Reference
Rear PTOindependentReference
Rear PTO Type540Reference
Dimensions
Wheelbase196 cmReference
Wheelbase199 cmReference
Weight3280 to 9345 poundsReference
Front tire7.50-16Reference
Rear tire14.9-24Reference
Industrial front7.50-16Reference
Industrial rear14.9-24Reference
Industrial front6.50-16Reference
Industrial rear13.6-24Reference
Industrial rear16.8-24Reference
Length332 cmReference
Length657 cmReference
Width195 cmReference
Width205 cmReference
Height (steering wheel)150 cmReference
Ground clearance39 cmReference
Front tread134 cmReference
Rear tread142 to 162 cmReference
3447 kgReference
4082 kgReference
4238 kgReference
Shipping1487 kgReference
Shipping1578 kgReference
Shipping1601 kgReference
Shipping1691 kgReference
J.I. Case 530 CK attachments
front-end loaderReference
backhoeReference
530 CK Serial Numbers
Location:Serial number plate on the right side of the dashboard.Reference
19608160001Reference
19618168801Reference
19628190001Reference
19638208001Reference
19648229001Reference
19658253501Reference
19668279001Reference
19654107201-4124100Reference
FAQ: How to read a serial number table.Reference
Links
Mike's 530CK data: information and manuals for the 530 Construction KingReference
Electrical
GroundpositiveReference
Charging systemgeneratorReference
Batteries1 (gas)Reference
Batteries2 (diesel)Reference
Battery volts12 (gas)Reference
Battery volts6 (diesel)Reference
Attachment overview
Front-end loaderReference
BackhoeReference
Case 14 Standard Boom Backhoe
Backhoe typeCase 14 Standard Boom BackhoeReference
Transport height320 cmReference
Digging depth411 cmReference
Reach from pivot509 cmReference
Loading height340 cmReference
Bucket force3973 kgReference
Case 14/16 Extendable Boom Backhoe
Backhoe typeCase 14/16 Extendable Boom BackhoeReference
Transport height377 cmReference
Digging depth (retracted stick)431 cmReference
Digging depth (extended stick)480 cmReference
Reach from pivot (retracted stick)529 cmReference
Reach from pivot (extended stick)594 cmReference
Loading height (retracted stick)350 cmReference
Loading height (extended stick)388 cmReference
Bucket force3973 kgReference
Speeds
With 14.9x24 rear tires. 2100 RPM speeds given in direct-drive mode.Reference
With 14.9x24 rear tires.Reference
With 14.9x24 rear tires. 2100 RPM speeds given in direct-drive mode. Optional high-speed fourth gear (18.8 mph at 1900 rpm, 20.8 at 2100 rpm).Reference
Values normalized to UK metric units. Every figure is traced to at least one source; verified specs are cross-checked against two or more.