Tractor · 2007Unverified
John Deere 7330
John Deere 7330 — Row-Crop tractor · 150 hp. Reference specifications; pending source verification.
Provisional listing — the headline figure is shown; full specifications are auto-generated and pending verification against published sources.
Rated power
150 hp
Weight
10800 to 12965 pounds
Hover a source tag to verify
Overview
ManufacturerJohn DeereReference
Row-Crop tractorReference
FactoriesWaterloo, Iowa, USAReference
FactoriesMannheim, Baden-Württemberg, GermanyReference
Original price$77,688 (2011)Reference
In the spring of 2011, production of the 7330 was moved from Waterloo to Mannheim. The 110-inch rear axle option was dropped at that time. The 7330 was available with ROPS or a basic cab. Upgraded hydraulics and hitch were optional with ROPS but upgraded systems with a cab were only available on the 7330 Premium.Reference
Drive4x2 2WDReference
Drive4x4 MFWD 4WD (optional)Reference
Steeringhydrostatic powerReference
Differential hydraulic wet disc brakesReference
Two-post Roll-Gard ROPS. Cab optional.Reference
Variants
7330base tractorReference
7330 Premiumdeluxe tractorReference
7330 Premium High-Crophigh-clearanceReference
Engine
John Deere 6.8L 6-cyl dieselReference
Engine (gross)111.9 kWReference
John Deere 6068HRW74Reference
turbocharged intercooled dieselReference
6-cylinder 12-valveReference
liquid-cooledReference
Displacement6.8 LReference
Bore/Stroke106 x 127 mmReference
Rated Power (gross)111.9 kWReference
Air cleanerdual paper elementsReference
Compression17.0:1Reference
Rated RPM2100Reference
Idle RPM850-2250Reference
Operating RPM1500-2100Reference
Torque687.5 NmReference
Torque RPM1500Reference
Firing order1-5-3-6-2-4Reference
Oil capacity19.7 LReference
Coolant capacity31.0 LReference
Coolant capacity33.7 LReference
Intake valve clearance0.356 mmReference
Exhaust valve clearance0.457 mmReference
Transmission
16-speed partial power shiftReference
20-speed partial power shiftReference
32-speed partial power shiftReference
TransmissionJohn Deere PowrQuadReference
Typepartial power shiftReference
Gears16 forward and reverseReference
Oil capacity51.9 LReference
Four ranges, each with four gears. Operated via range shift lever and gear shift lever plus reverser lever. Clutch must be used to change range, clutchless power shift between gears and for direction change.Reference
Gears20 forward and reverseReference
Five ranges, each with four gears. Operated via range shift lever and gear shift lever plus reverser lever. Clutch must be used to change range, clutchless power shift between gears and for direction change.Reference
TransmissionJohn Deere PowrQuad PlusReference
PowrQuad Plus is standard on tractors with cab, replacing the separate gear shift lever with a push-button gear shift on the range lever. Available in 16- or 20-speed. Clutch must be used to change range, cluthless push-button power shift for speeds.Reference
TransmissionJohn Deere PowrQuad CreeperReference
Gears32 forward and reverseReference
Oil capacity53.0 LReference
Optional creeper could be added to both the 16- and 20-speed PowrQuad. Creeper is engaged with a separate shift lever that selects between creeper (turtle) and the standard transmission ratio (rabbit). Tractor must be stopped, clutch used, and engine speed below 1000 RPMs to shift in or out of the creeper.Reference
PTO & Hydraulics
PTO (claimed)93.2 kWReference
Hydraulic system51.9 LReference
Typeconstant flow load sensingReference
Typeclosed-center load sensing (optional ROPS)Reference
Capacity51.9 LReference
Pressure200.0 barReference
Valves2 to 4Reference
Pump flow79.9 lpmReference
Pump flow109.8 lpmReference
Rear TypeIIReference
Rear Type3N/2Reference
Controlposition controlReference
Controlelectronic lower-link (optional ROPS)Reference
Rear lift (at 24"/610mm)3991 kgReference
Rear lift (at 24"/610mm)3719 kgReference
Rear PTOindependentReference
Rear PTO Type540/1000Reference
Engine RPM540@1995Reference
Engine RPM1000@1995Reference
Capacities
Fuel249.8 LReference
Front axle8.3 LReference
Front hubs1.5 LReference
Max capacity10500 kgReference
Dimensions
Wheelbase264 cmReference
Weight10800 to 12965 poundsReference
Front tire10.00-16Reference
Rear tire18.4R38 (2WD)Reference
Standard tires (ag)Front: 10.00-16. Rear: 18.4R38 (2WD)Reference
Standard tires (ag)Front: 14.9R28. Rear: 18.4R38 (4WD)Reference
Length475 cmReference
Width166 cmReference
Clearance (front axle)54 cmReference
Clearance (front axle)58 cmReference
Clearance (rear axle)71 cmReference
Clearance (drawbar)48 cmReference
Rear axle1524 mmReference
Rear axle85 by 2438 mmReference
Rear axle85 by 2806 mmReference
Front tread195 to 256 cmReference
Rear tread152 to 254 cmReference
Rear tread160 to 275 cmReference
Rear tread152 to 223 cmReference
Shipping4898 kgReference
Shipping5880 kgReference
Max Drawbar2249 kgReference
Max front axle2050 kgReference
Max front axle4799 kgReference
Max front axle5000 kgReference
Max front axle7098 kgReference
Max rear axle7500 kgReference
7330 Serial Number Location
Right side of main frame above front axle.Reference
Electrical
GroundnegativeReference
Charging systemalternatorReference
Charging volts14Reference
Battery volts12Reference
John Deere 7330 Height
ROPS292 cmReference
ROPS230 cmReference
Cab290 cmReference
Speeds
With 18.4R38 rear tires.Reference
With 18.4R38 rear tires. Sixteen-speed transmission has same ground speeds but without E Range.Reference
Values normalized to UK metric units. Every figure is traced to at least one source; verified specs are cross-checked against two or more.